This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 5255, EID 5504, EID 5566, EID 5756, EID 6277, EID 6473, EID 7311
Internet Engineering Task Force (IETF)                        A. Bierman
Request for Comments: 8040                                     YumaWorks
Category: Standards Track                                   M. Bjorklund
ISSN: 2070-1721                                           Tail-f Systems
                                                               K. Watsen
                                                        Juniper Networks
                                                            January 2017


                           RESTCONF Protocol

Abstract

   This document describes an HTTP-based protocol that provides a
   programmatic interface for accessing data defined in YANG, using the
   datastore concepts defined in the Network Configuration Protocol
   (NETCONF).

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc8040.

Copyright Notice

   Copyright (c) 2017 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1. Introduction ....................................................5
      1.1. Terminology ................................................5
           1.1.1. NETCONF .............................................6
           1.1.2. HTTP ................................................6
           1.1.3. YANG ................................................7
           1.1.4. NETCONF Notifications ...............................7
           1.1.5. Terms ...............................................8
           1.1.6. URI Template and Examples ..........................10
           1.1.7. Tree Diagrams ......................................11
      1.2. Subset of NETCONF Functionality ...........................11
      1.3. Data-Model-Driven API .....................................12
      1.4. Coexistence with NETCONF ..................................13
      1.5. RESTCONF Extensibility ....................................14
   2. Transport Protocol .............................................15
      2.1. Integrity and Confidentiality .............................15
      2.2. HTTPS with X.509v3 Certificates ...........................16
      2.3. Certificate Validation ....................................16
      2.4. Authenticated Server Identity .............................16
      2.5. Authenticated Client Identity .............................16
   3. Resources ......................................................17
      3.1. Root Resource Discovery ...................................18
      3.2. RESTCONF Media Types ......................................20
      3.3. API Resource ..............................................20
           3.3.1. {+restconf}/data ...................................21
           3.3.2. {+restconf}/operations .............................22
           3.3.3. {+restconf}/yang-library-version ...................22
      3.4. Datastore Resource ........................................23
           3.4.1. Edit Collision Prevention ..........................23
      3.5. Data Resource .............................................24
           3.5.1. Timestamp ..........................................25
           3.5.2. Entity-Tag .........................................25
           3.5.3. Encoding Data Resource Identifiers in the
                  Request URI ........................................26
           3.5.4. Default Handling ...................................29
      3.6. Operation Resource ........................................30
           3.6.1. Encoding Operation Resource Input Parameters .......31
           3.6.2. Encoding Operation Resource Output Parameters ......36
           3.6.3. Encoding Operation Resource Errors .................38
      3.7. Schema Resource ...........................................40
      3.8. Event Stream Resource .....................................41
      3.9. "errors" YANG Data Template ...............................41
   4. RESTCONF Methods ...............................................42
      4.1. OPTIONS ...................................................43
      4.2. HEAD ......................................................43
      4.3. GET .......................................................43
      4.4. POST ......................................................45

           4.4.1. Create Resource Mode ...............................45
           4.4.2. Invoke Operation Mode ..............................47
      4.5. PUT .......................................................48
      4.6. PATCH .....................................................50
           4.6.1. Plain Patch ........................................50
      4.7. DELETE ....................................................51
      4.8. Query Parameters ..........................................52
           4.8.1. The "content" Query Parameter ......................54
           4.8.2. The "depth" Query Parameter ........................54
           4.8.3. The "fields" Query Parameter .......................55
           4.8.4. The "filter" Query Parameter .......................56
           4.8.5. The "insert" Query Parameter .......................57
           4.8.6. The "point" Query Parameter ........................57
           4.8.7. The "start-time" Query Parameter ...................58
           4.8.8. The "stop-time" Query Parameter ....................58
           4.8.9. The "with-defaults" Query Parameter ................59
   5. Messages .......................................................60
      5.1. Request URI Structure .....................................61
      5.2. Message Encoding ..........................................62
      5.3. RESTCONF Metadata .........................................63
           5.3.1. XML Metadata Encoding Example ......................64
           5.3.2. JSON Metadata Encoding Example .....................65
      5.4. Return Status .............................................65
      5.5. Message Caching ...........................................66
   6. Notifications ..................................................66
      6.1. Server Support ............................................66
      6.2. Event Streams .............................................67
      6.3. Subscribing to Receive Notifications ......................68
           6.3.1. NETCONF Event Stream ...............................70
      6.4. Receiving Event Notifications .............................70
   7. Error Reporting ................................................73
      7.1. Error Response Message ....................................75
   8. RESTCONF Module ................................................79
   9. RESTCONF Monitoring ............................................85
      9.1. restconf-state/capabilities ...............................86
           9.1.1. Query Parameter URIs ...............................87
           9.1.2. The "defaults" Protocol Capability URI .............87
      9.2. restconf-state/streams ....................................88
      9.3. RESTCONF Monitoring Module ................................89
   10. YANG Module Library ...........................................93
      10.1. modules-state/module .....................................93
   11. IANA Considerations ...........................................94
      11.1. The "restconf" Relation Type .............................94
      11.2. Registrations for New URIs and YANG Modules ..............94
      11.3. Media Types ..............................................95
           11.3.1. Media Type "application/yang-data+xml" ............95
           11.3.2. Media Type "application/yang-data+json" ...........96

      11.4. RESTCONF Capability URNs .................................97
      11.5. Registration of "restconf" URN Sub-namespace .............98
   12. Security Considerations .......................................99
   13. References ...................................................100
      13.1. Normative References ....................................100
      13.2. Informative References ..................................104
   Appendix A. Example YANG Module ..................................105
     A.1. "example-jukebox" YANG Module .............................106
   Appendix B. RESTCONF Message Examples ............................112
     B.1. Resource Retrieval Examples ...............................112
       B.1.1. Retrieve the Top-Level API Resource ...................112
       B.1.2. Retrieve the Server Module Information ................114
       B.1.3. Retrieve the Server Capability Information ............117
     B.2. Data Resource and Datastore Resource Examples .............118
       B.2.1. Create New Data Resources .............................118
       B.2.2. Detect Datastore Resource Entity-Tag Change ...........119
       B.2.3. Edit a Datastore Resource .............................121
       B.2.4. Replace a Datastore Resource ..........................122
       B.2.5. Edit a Data Resource ..................................122
     B.3. Query Parameter Examples ..................................123
       B.3.1. "content" Parameter ...................................123
       B.3.2. "depth" Parameter .....................................126
       B.3.3. "fields" Parameter ....................................130
       B.3.4. "insert" Parameter ....................................132
       B.3.5. "point" Parameter .....................................133
       B.3.6. "filter" Parameter ....................................134
       B.3.7. "start-time" Parameter ................................134
       B.3.8. "stop-time" Parameter .................................135
       B.3.9. "with-defaults" Parameter .............................135
   Acknowledgements .................................................137
   Authors' Addresses ...............................................137

1.  Introduction

   There is a need for standard mechanisms to allow Web applications to
   access the configuration data, state data, data-model-specific Remote
   Procedure Call (RPC) operations, and event notifications within a
   networking device, in a modular and extensible manner.

   This document defines a protocol based on HTTP [RFC7230] called
   "RESTCONF", for configuring data defined in YANG version 1 [RFC6020]
   or YANG version 1.1 [RFC7950], using the datastore concepts defined
   in the Network Configuration Protocol (NETCONF) [RFC6241].

   NETCONF defines configuration datastores and a set of Create, Read,
   Update, Delete (CRUD) operations that can be used to access these
   datastores.  NETCONF also defines a protocol for invoking these
   operations.  The YANG language defines the syntax and semantics of
   datastore content, configuration, state data, RPC operations, and
   event notifications.

   RESTCONF uses HTTP methods to provide CRUD operations on a conceptual
   datastore containing YANG-defined data, which is compatible with a
   server that implements NETCONF datastores.

   If a RESTCONF server is co-located with a NETCONF server, then there
   are protocol interactions with the NETCONF protocol; these
   interactions are described in Section 1.4.  The RESTCONF server MAY
   provide access to specific datastores using operation resources, as
   described in Section 3.6.  The RESTCONF protocol does not specify any
   mandatory operation resources.  The semantics of each operation
   resource determine if and how datastores are accessed.

   Configuration data and state data are exposed as resources that can
   be retrieved with the GET method.  Resources representing
   configuration data can be modified with the DELETE, PATCH, POST, and
   PUT methods.  Data is encoded with either XML [W3C.REC-xml-20081126]
   or JSON [RFC7159].

   Data-model-specific RPC operations defined with the YANG "rpc" or
   "action" statements can be invoked with the POST method.  Data-model-
   specific event notifications defined with the YANG "notification"
   statement can be accessed.

1.1.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

1.1.1.  NETCONF

   The following terms are defined in [RFC6241]:

   o  candidate configuration datastore

   o  configuration data

   o  datastore

   o  configuration datastore

   o  running configuration datastore

   o  startup configuration datastore

   o  state data

   o  user

1.1.2.  HTTP

   The following terms are defined in [RFC3986]:

   o  fragment

   o  path

   o  query

   The following terms are defined in [RFC7230]:

   o  header field

   o  message-body

   o  request-line

   o  request URI

   o  status-line

   The following terms are defined in [RFC7231]:

   o  method

   o  request

   o  resource

   The following term is defined in [RFC7232]:

   o  entity-tag

1.1.3.  YANG

   The following terms are defined in [RFC7950]:

   o  action

   o  container

   o  data node

   o  key leaf

   o  leaf

   o  leaf-list

   o  list

   o  mandatory node

   o  ordered-by user

   o  presence container

   o  RPC operation

   o  top-level data node

1.1.4.  NETCONF Notifications

   The following term is defined in [RFC5277]:

   o  notification replay

1.1.5.  Terms

   The following terms are used within this document:

   o  API resource: the resource that models the RESTCONF root resource
      and the sub-resources to access YANG-defined content.  It is
      defined with the YANG data template named "yang-api" in the
      "ietf-restconf" module.

   o  client: a RESTCONF client.

   o  data resource: a resource that models a YANG data node.  It is
      defined with YANG data definition statements.

   o  datastore resource: the resource that models a programmatic
      interface using NETCONF datastore concepts.  By default, RESTCONF
      methods access a unified view of the underlying datastore
      implementation on the server.  It is defined as a sub-resource
      within the API resource.

   o  edit operation: a RESTCONF operation on a data resource using
      either a POST, PUT, PATCH, or DELETE method.  This is not the same
      as the NETCONF edit operation (i.e., one of the values for the
      "nc:operation" attribute: "create", "replace", "merge", "delete",
      or "remove").

   o  event stream resource: a resource that represents an SSE
      (Server-Sent Events) event stream.  The content consists of text
      using the media type "text/event-stream", as defined by the SSE
      specification [W3C.REC-eventsource-20150203].  Event stream
      contents are described in Section 3.8.

   o  media type: HTTP uses Internet media types [RFC2046] in the
      "Content-Type" and "Accept" header fields in order to provide open
      and extensible data typing and type negotiation.

   o  NETCONF client: a client that implements the NETCONF protocol.
      Called "client" in [RFC6241].

   o  NETCONF server: a server that implements the NETCONF protocol.
      Called "server" in [RFC6241].

   o  operation: the conceptual RESTCONF operation for a message,
      derived from the HTTP method, request URI, header fields, and
      message-body.

   o  operation resource: a resource that models a data-model-specific
      operation that is in turn defined with a YANG "rpc" or "action"
      statement.  It is invoked with the POST method.

   o  patch: a PATCH method on the target datastore or data resource.
      The media type of the message-body content will identify the patch
      type in use.

   o  plain patch: a specific media type for use with the PATCH method;
      see Section 4.6.1.  It can be used for simple "merge" edit
      operations.  It is specified by a request Content-Type of
      "application/yang-data+xml" or "application/yang-data+json".

   o  query parameter: a parameter (and its value, if any), encoded
      within the query component of the request URI.

   o  resource type: one of the RESTCONF resource classes defined in
      this document.  One of "api", "datastore", "data", "operation",
      "schema", or "event stream".

   o  RESTCONF capability: an optional RESTCONF protocol feature that is
      advertised by a particular server if the feature is supported on
      that server.  The feature is identified by an IANA-registered
      NETCONF Capability URI and advertised with an entry in the
      "capability" leaf-list defined in Section 9.3.

   o  RESTCONF client: a client that implements the RESTCONF protocol.

   o  RESTCONF server: a server that implements the RESTCONF protocol.

   o  retrieval request: a request using the GET or HEAD methods.

   o  schema resource: a resource that is used by the client to retrieve
      a YANG schema with the GET method.  It has a representation with
      the media type "application/yang".

   o  server: a RESTCONF server.

   o  "stream" list: the set of data resource instances that describe
      the event stream resources available from the server.  This
      information is defined in the "ietf-restconf-monitoring" module as
      the "stream" list.  It can be retrieved using the target resource
      "{+restconf}/data/ietf-restconf-monitoring:restconf-state/streams/
      stream".  The "stream" list contains information about each
      stream, such as the URL to retrieve the event stream data.

   o  stream resource: an event stream resource.

   o  target resource: the resource that is associated with a particular
      message, identified by the "path" component of the request URI.

   o  yang-data extension: a YANG external statement that conforms to
      the "yang-data" extension statement, found in Section 8.  The
      yang-data extension is used to define YANG data structures that
      are meant to be used as YANG data templates.  These data
      structures are not intended to be implemented as part of a
      configuration datastore or as an operational state within the
      server, so normal YANG data definition statements cannot be used.

   o  YANG data template: a schema for modeling protocol message
      components as conceptual data structures using YANG.  This allows
      the messages to be defined in an encoding-independent manner.
      Each YANG data template is defined with the "yang-data" extension,
      found in Section 8.  Representations of instances conforming to a
      particular YANG data template can be defined for YANG.  The XML
      representation is defined in YANG version 1.1 [RFC7950] and
      supported with the "application/yang-data+xml" media type.  The
      JSON representation is defined in "JSON Encoding of Data Modeled
      with YANG" [RFC7951] and supported with the
      "application/yang-data+json" media type.

1.1.6.  URI Template and Examples

   Throughout this document, the URI template [RFC6570] syntax
   "{+restconf}" is used to refer to the RESTCONF root resource outside
   of an example.  See Section 3.1 for details.

   For simplicity, all of the examples in this document use "/restconf"
   as the discovered RESTCONF API root path.  Many of the examples
   throughout the document are based on the "example-jukebox" YANG
   module defined in Appendix A.1.

   Many protocol header lines and message-body text within examples
   throughout the document are split into multiple lines for display
   purposes only.  When a line ends with a backslash ("\") as the last
   character, the line is wrapped for display purposes.  It is to be
   considered to be joined to the next line by deleting the backslash,
   the following line break, and the leading whitespace of the
   next line.

1.1.7.  Tree Diagrams

   A simplified graphical representation of the data model is used in
   this document.  The meanings of the symbols in these diagrams are as
   follows:

   o  Brackets "[" and "]" enclose list keys.

   o  Abbreviations before data node names: "rw" means configuration
      data (read-write), "ro" means state data (read-only), and "x"
      means operation resource (executable).

   o  Symbols after data node names: "?" means an optional node, "!"
      means a presence container, and "*" denotes a list and leaf-list.

   o  Parentheses enclose choice and case nodes, and case nodes are also
      marked with a colon (":").

   o  Ellipsis ("...") stands for contents of subtrees that are not
      shown.

1.2.  Subset of NETCONF Functionality

   RESTCONF does not need to mirror the full functionality of the
   NETCONF protocol, but it does need to be compatible with NETCONF.
   RESTCONF achieves this by implementing a subset of the interaction
   capabilities provided by the NETCONF protocol -- for instance, by
   eliminating datastores and explicit locking.

   RESTCONF uses HTTP methods to implement the equivalent of NETCONF
   operations, enabling basic CRUD operations on a hierarchy of
   conceptual resources.

   The HTTP POST, PUT, PATCH, and DELETE methods are used to edit data
   resources represented by YANG data models.  These basic edit
   operations allow the running configuration to be altered by a
   RESTCONF client.

   RESTCONF is not intended to replace NETCONF, but rather to provide an
   HTTP interface that follows Representational State Transfer (REST)
   principles [REST-Dissertation] and is compatible with the NETCONF
   datastore model.

1.3.  Data-Model-Driven API

   RESTCONF combines the simplicity of HTTP with the predictability and
   automation potential of a schema-driven API.  Knowing the YANG
   modules used by the server, a client can derive all management
   resource URLs and the proper structure of all RESTCONF requests and
   responses.  This strategy obviates the need for responses provided by
   the server to contain Hypermedia as the Engine of Application State
   (HATEOAS) links, originally described in Roy Fielding's doctoral
   dissertation [REST-Dissertation], because the client can determine
   the links it needs from the YANG modules.

   RESTCONF utilizes the YANG library [RFC7895] to allow a client to
   discover the YANG module conformance information for the server, in
   case the client wants to use it.

   The server can optionally support the retrieval of the YANG modules
   it uses, as identified in its YANG library.  See Section 3.7 for
   details.

   The URIs for data-model-specific RPC operations and datastore content
   are predictable, based on the YANG module definitions.

   The RESTCONF protocol operates on a conceptual datastore defined with
   the YANG data modeling language.  The server lists each YANG module
   it supports using the "ietf-yang-library" YANG module defined in
   [RFC7895].  The server MUST implement the "ietf-yang-library" module,
   which MUST identify all of the YANG modules used by the server, in
   the "modules-state/module" list.  The conceptual datastore contents,
   data-model-specific RPC operations, and event notifications are
   identified by this set of YANG modules.

   The classification of data as configuration data or non-configuration
   data is derived from the YANG "config" statement.  Behavior related
   to the ordering of data is derived from the YANG "ordered-by"
   statement.  Non-configuration data is also called "state data".

   The RESTCONF datastore editing model is simple and direct, similar to
   the behavior of the :writable-running capability in NETCONF.  Each
   RESTCONF edit of a data resource within the datastore resource is
   activated upon successful completion of the edit.

1.4.  Coexistence with NETCONF

   RESTCONF can be implemented on a device that supports the NETCONF
   protocol.

   The following figure shows the system components if a RESTCONF server
   is co-located with a NETCONF server:

         +-----------+           +-----------------+
         |  Web app  | <-------> |                 |
         +-----------+  RESTCONF | network device  |
                                 |                 |
         +-----------+           |   +-----------+ |
         | NETCONF   | <-------> |   | datastore | |
         | Client    |  NETCONF  |   |           | |
         +-----------+           |   +-----------+ |
                                 +-----------------+

   The following figure shows the system components if a RESTCONF server
   is implemented in a device that does not have a NETCONF server:

         +-----------+           +-----------------+
         |  Web app  | <-------> |                 |
         +-----------+  RESTCONF | network device  |
                                 |                 |
                                 +-----------------+

   There are interactions between the NETCONF protocol and RESTCONF
   protocol related to edit operations.  It is possible that locks are
   in use on a RESTCONF server, even though RESTCONF cannot manipulate
   locks.  In such a case, the RESTCONF protocol will not be granted
   write access to data resources within a datastore.

   If the NETCONF server supports :writable-running, all edits to
   configuration nodes in {+restconf}/data are performed in the running
   configuration datastore.  The URI template "{+restconf}" is defined
   in Section 1.1.6.

   Otherwise, if the device supports :candidate, all edits to
   configuration nodes in {+restconf}/data are performed in the
   candidate configuration datastore.  The candidate MUST be
   automatically committed to running immediately after each successful
   edit.  Any edits from other sources that are in the candidate
   datastore will also be committed.  If a confirmed commit procedure is
   in progress by any NETCONF client, then any new commit will act as
   the confirming commit.  If the NETCONF server is expecting a

   "persist-id" parameter to complete the confirmed commit procedure,
   then the RESTCONF edit operation MUST fail with a "409 Conflict"
   status-line.  The error-tag "in-use" is used in this case.

   If the NETCONF server supports :startup, the RESTCONF server MUST
   automatically update the non-volatile startup configuration
   datastore, after the "running" datastore has been altered as a
   consequence of a RESTCONF edit operation.

   If a datastore that would be modified by a RESTCONF operation has an
   active lock from a NETCONF client, the RESTCONF edit operation MUST
   fail with a "409 Conflict" status-line.  The error-tag value "in-use"
   is returned in this case.

1.5.  RESTCONF Extensibility

   There are two extensibility mechanisms built into RESTCONF:

   o  protocol version

   o  optional capabilities

   This document defines version 1 of the RESTCONF protocol.  If a
   future version of this protocol is defined, then that document will
   specify how the new version of RESTCONF is identified.  It is
   expected that a different RESTCONF root resource will be used, which
   will be located using a different link relation (see Section 3.1).

   The server will advertise all protocol versions that it supports in
   its host-meta data.

   In this example, the server supports both RESTCONF version 1 and a
   fictitious version 2.

   The client might send the following:

      GET /.well-known/host-meta HTTP/1.1
      Host: example.com
      Accept: application/xrd+xml

   The server might respond as follows:

      HTTP/1.1 200 OK
      Content-Type: application/xrd+xml
      Content-Length: nnn

      <XRD xmlns='http://docs.oasis-open.org/ns/xri/xrd-1.0'>
          <Link rel='restconf' href='/restconf'/>
          <Link rel='restconf2' href='/restconf2'/>
      </XRD>

   RESTCONF also supports a server-defined list of optional
   capabilities, which are listed by a server using the
   "ietf-restconf-monitoring" module defined in Section 9.3.  This
   document defines several query parameters in Section 4.8.  Each
   optional parameter has a corresponding capability URI, defined in
   Section 9.1.1, that is advertised by the server if supported.

   The "capability" leaf-list can identify any sort of server extension.
   Currently, this extension mechanism is used to identify optional
   query parameters that are supported, but it is not limited to that
   purpose.  For example, the "defaults" URI defined in Section 9.1.2
   specifies a mandatory URI identifying server default-handling
   behavior.

   A new sub-resource type could be identified with a capability if it
   is optional to implement.  Mandatory protocol features and new
   resource types require a new revision of the RESTCONF protocol.

2.  Transport Protocol

2.1.  Integrity and Confidentiality

   HTTP [RFC7230] is an application-layer protocol that may be layered
   on any reliable transport-layer protocol.  RESTCONF is defined on top
   of HTTP, but due to the sensitive nature of the information conveyed,
   RESTCONF requires that the transport-layer protocol provide both data
   integrity and confidentiality.  A RESTCONF server MUST support the
   Transport Layer Security (TLS) protocol [RFC5246] and SHOULD adhere
   to [RFC7525].  The RESTCONF protocol MUST NOT be used over HTTP
   without using the TLS protocol.

   RESTCONF does not require a specific version of HTTP.  However, it is
   RECOMMENDED that at least HTTP/1.1 [RFC7230] be supported by all
   implementations.

2.2.  HTTPS with X.509v3 Certificates

   Given the nearly ubiquitous support for HTTP over TLS [RFC7230],
   RESTCONF implementations MUST support the "https" URI scheme, which
   has the IANA-assigned default port 443.

   RESTCONF servers MUST present an X.509v3-based certificate when
   establishing a TLS connection with a RESTCONF client.  The use of
   X.509v3-based certificates is consistent with NETCONF over TLS
   [RFC7589].

2.3.  Certificate Validation

   The RESTCONF client MUST either (1) use X.509 certificate path
   validation [RFC5280] to verify the integrity of the RESTCONF server's
   TLS certificate or (2) match the server's TLS certificate with a
   certificate obtained by a trusted mechanism (e.g., a pinned
   certificate).  If X.509 certificate path validation fails and the
   presented X.509 certificate does not match a certificate obtained by
   a trusted mechanism, the connection MUST be terminated, as described
   in Section 7.2.1 of [RFC5246].

2.4.  Authenticated Server Identity

   The RESTCONF client MUST check the identity of the server according
   to Section 3.1 of [RFC2818].

2.5.  Authenticated Client Identity

   The RESTCONF server MUST authenticate client access to any protected
   resource.  If the RESTCONF client is not authenticated, the server
   SHOULD send an HTTP response with a "401 Unauthorized" status-line,
   as defined in Section 3.1 of [RFC7235].  The error-tag value
   "access-denied" is used in this case.

   To authenticate a client, a RESTCONF server SHOULD require
   authentication based on TLS client certificates (Section 7.4.6 of
   [RFC5246]).  If certificate-based authentication is not feasible
   (e.g., because one cannot build the required PKI for clients), then
   HTTP authentication MAY be used.  In the latter case, one of the HTTP
   authentication schemes defined in the "Hypertext Transfer Protocol
   (HTTP) Authentication Scheme Registry" (Section 5.1 in [RFC7235])
   MUST be used.

   A server MAY also support the combination of both client certificates
   and an HTTP client authentication scheme, with the determination of
   how to process this combination left as an implementation decision.

   The RESTCONF client identity derived from the authentication
   mechanism used is hereafter known as the "RESTCONF username" and
   subject to the NETCONF Access Control Model (NACM) [RFC6536].  When a
   client certificate is presented, the RESTCONF username MUST be
   derived using the algorithm defined in Section 7 of [RFC7589].  For
   all other cases, when HTTP authentication is used, the RESTCONF
   username MUST be provided by the HTTP authentication scheme used.

3.  Resources

   The RESTCONF protocol operates on a hierarchy of resources, starting
   with the top-level API resource itself (Section 3.1).  Each resource
   represents a manageable component within the device.

   A resource can be considered as a collection of data and the set of
   allowed methods on that data.  It can contain nested child resources.
   The child resource types and the methods allowed on them are specific
   to the data model.

   A resource has a representation associated with a media type
   identifier, as represented by the "Content-Type" header field in the
   HTTP response message.  A resource has one or more representations,
   each associated with a different media type.  When a representation
   of a resource is sent in an HTTP message, the associated media type
   is given in the "Content-Type" header.  A resource can contain zero
   or more nested resources.  A resource can be created and deleted
   independently of its parent resource, as long as the parent resource
   exists.

   The RESTCONF resources are accessed via a set of URIs defined in this
   document.  The set of YANG modules supported by the server will
   determine the data-model-specific RPC operations, top-level data
   nodes, and event notification messages supported by the server.

   The RESTCONF protocol does not include a data resource discovery
   mechanism.  Instead, the definitions within the YANG modules
   advertised by the server are used to construct an RPC operation or
   data resource identifier.

3.1.  Root Resource Discovery

   In line with the best practices defined by [RFC7320], RESTCONF
   enables deployments to specify where the RESTCONF API is located.
   When first connecting to a RESTCONF server, a RESTCONF client MUST
   determine the root of the RESTCONF API.  There MUST be exactly one
   "restconf" link relation returned by the device.

   The client discovers this by getting the "/.well-known/host-meta"
   resource ([RFC6415]) and using the <Link> element containing the
   "restconf" attribute:

   Example returning /restconf:

   The client might send the following:

      GET /.well-known/host-meta HTTP/1.1
      Host: example.com
      Accept: application/xrd+xml

   The server might respond as follows:

      HTTP/1.1 200 OK
      Content-Type: application/xrd+xml
      Content-Length: nnn

      <XRD xmlns='http://docs.oasis-open.org/ns/xri/xrd-1.0'>
          <Link rel='restconf' href='/restconf'/>
      </XRD>

   After discovering the RESTCONF API root, the client MUST use this
   value as the initial part of the path in the request URI, in any
   subsequent request for a RESTCONF resource.

   In this example, the client would use the path "/restconf" as the
   RESTCONF root resource.

   Example returning /top/restconf:

   The client might send the following:

      GET /.well-known/host-meta HTTP/1.1
      Host: example.com
      Accept: application/xrd+xml

   The server might respond as follows:

      HTTP/1.1 200 OK
      Content-Type: application/xrd+xml
      Content-Length: nnn

      <XRD xmlns='http://docs.oasis-open.org/ns/xri/xrd-1.0'>
          <Link rel='restconf' href='/top/restconf'/>
      </XRD>

   In this example, the client would use the path "/top/restconf" as the
   RESTCONF root resource.

   The client can now determine the operation resources supported by the
   server.  In this example, a custom "play" operation is supported:

   The client might send the following:

      GET /top/restconf/operations HTTP/1.1
      Host: example.com
      Accept: application/yang-data+json

   The server might respond as follows:

      HTTP/1.1 200 OK
      Date: Thu, 26 Jan 2017 20:56:30 GMT
      Server: example-server
      Cache-Control: no-cache
      Last-Modified: Thu, 26 Jan 2017 16:00:14 GMT
      Content-Type: application/yang-data+json

      { "operations" : { "example-jukebox:play" : [null] } }

   If the Extensible Resource Descriptor (XRD) contains more than one
   link relation, then only the relation named "restconf" is relevant to
   this specification.

   Note that any given endpoint (host:port) can only support one
   RESTCONF server, due to the root resource discovery mechanism.  This
   limits the number of RESTCONF servers that can run concurrently on a
   host, since each server must use a different port.

3.2.  RESTCONF Media Types

   The RESTCONF protocol defines two application-specific media types to
   identify representations of data that conforms to the schema for a
   particular YANG construct.

   This document defines media types for XML and JSON serialization
   of YANG data.  Other documents MAY define other media types for
   different serializations of YANG data.  The
   "application/yang-data+xml" media type is defined in Section 11.3.1.
   The "application/yang-data+json" media type is defined in
   Section 11.3.2.

3.3.  API Resource

   The API resource contains the RESTCONF root resource for the RESTCONF
   datastore and operation resources.  It is the top-level resource
   located at {+restconf} and has the media type
   "application/yang-data+xml" or "application/yang-data+json".

   YANG tree diagram for an API resource:

     +---- {+restconf}
           +---- data
           | ...
           +---- operations?
           | ...
           +--ro yang-library-version    string

   The "yang-api" YANG data template is defined using the "yang-data"
   extension in the "ietf-restconf" module, found in Section 8.  It
   specifies the structure and syntax of the conceptual child resources
   within the API resource.

   The API resource can be retrieved with the GET method.

   The {+restconf} root resource name used in responses representing the
   root of the "ietf-restconf" module MUST identify the "ietf-restconf"
   YANG module.  For example, a request to GET the root resource
   "/restconf" in JSON format will return a representation of the API
   resource named "ietf-restconf:restconf".

   This resource has the following child resources:

        +----------------------+---------------------------------+
        | Child Resource       | Description                     |
        +----------------------+---------------------------------+
        | data                 | Contains all data resources     |
        | operations           | Data-model-specific operations  |
        | yang-library-version | "ietf-yang-library" module date |
        +----------------------+---------------------------------+

                           RESTCONF API Resource

3.3.1.  {+restconf}/data

   This mandatory resource represents the combined configuration and
   state data resources that can be accessed by a client.  It cannot be
   created or deleted by the client.  The datastore resource type is
   defined in Section 3.4.

   Example:

   This example request by the client would retrieve only the
   non-configuration data nodes that exist within the "library"
   resource, using the "content" query parameter (see Section 4.8.1).

      GET /restconf/data/example-jukebox:jukebox/library\
          ?content=nonconfig HTTP/1.1
      Host: example.com
      Accept: application/yang-data+xml

   The server might respond as follows:

      HTTP/1.1 200 OK
      Date: Thu, 26 Jan 2017 20:56:30 GMT
      Server: example-server
      Cache-Control: no-cache
      Content-Type: application/yang-data+xml

      <library xmlns="https://example.com/ns/example-jukebox">
        <artist-count>42</artist-count>
        <album-count>59</album-count>
        <song-count>374</song-count>
      </library>

3.3.2.  {+restconf}/operations

   This optional resource is a container that provides access to the
   data-model-specific RPC operations supported by the server.  The
   server MAY omit this resource if no data-model-specific RPC
   operations are advertised.

   Any data-model-specific RPC operations defined in the YANG modules
   advertised by the server MUST be available as child nodes of this
   resource.

   The access point for each RPC operation is represented as an empty
   leaf.  If an operation resource is retrieved, the empty leaf
   representation is returned by the server.

   Operation resources are defined in Section 3.6.

3.3.3.  {+restconf}/yang-library-version

   This mandatory leaf identifies the revision date of the
   "ietf-yang-library" YANG module that is implemented by this server.
   In the example that follows, the revision date for the module version
   found in [RFC7895] is used.

   Example:

      GET /restconf/yang-library-version HTTP/1.1
      Host: example.com
      Accept: application/yang-data+xml

   The server might respond as follows:

      HTTP/1.1 200 OK
      Date: Thu, 26 Jan 2017 20:56:30 GMT
      Server: example-server
      Cache-Control: no-cache
      Content-Type: application/yang-data+xml

      <yang-library-version
        xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf">\
        2016-06-21\
      </yang-library-version>

3.4.  Datastore Resource

   The "{+restconf}/data" subtree represents the datastore resource,
   which is a collection of configuration data and state data nodes.

   This resource type is an abstraction of the system's underlying
   datastore implementation.  The client uses it to edit and retrieve
   data resources, as the conceptual root of all configuration and state
   data that is present on the device.

   Configuration edit transaction management and configuration
   persistence are handled by the server and not controlled by the
   client.  A datastore resource can be written directly with the POST
   and PATCH methods.  Each RESTCONF edit of a datastore resource is
   saved to non-volatile storage by the server if the server supports
   non-volatile storage of configuration data, as described in
   Section 1.4.

   If the datastore resource represented by the "{+restconf}/data"
   subtree is retrieved, then the datastore and its contents are
   returned by the server.  The datastore is represented by a node named
   "data" in the "ietf-restconf" module namespace.

3.4.1.  Edit Collision Prevention

   Two edit collision detection and prevention mechanisms are provided
   in RESTCONF for the datastore resource: a timestamp and an
   entity-tag.  Any change to configuration data resources updates the
   timestamp and entity-tag of the datastore resource.  In addition, the
   RESTCONF server MUST return an error if the datastore is locked by an
   external source (e.g., NETCONF server).

3.4.1.1.  Timestamp

   The last change time is maintained, and the "Last-Modified" header
   field (Section 2.2 of [RFC7232]) is returned in the response for a
   retrieval request.  The "If-Unmodified-Since" header field
   (Section 3.4 of [RFC7232]) can be used in edit operation requests to
   cause the server to reject the request if the resource has been
   modified since the specified timestamp.

   The server SHOULD maintain a last-modified timestamp for the
   datastore resource, defined in Section 3.4.  This timestamp is only
   affected by configuration child data resources and MUST NOT be
   updated for changes to non-configuration child data resources.
   Last-modified timestamps for data resources are discussed in
   Section 3.5.

   If the RESTCONF server is co-located with a NETCONF server, then the
   last-modified timestamp MUST be for the "running" datastore.  Note
   that it is possible that other protocols can cause the last-modified
   timestamp to be updated.  Such mechanisms are out of scope for this
   document.

3.4.1.2.  Entity-Tag

   The server MUST maintain a unique opaque entity-tag for the datastore
   resource and MUST return it in the "ETag" (Section 2.3 of [RFC7232])
   header in the response for a retrieval request.  The client MAY use
   an "If-Match" header in edit operation requests to cause the server
   to reject the request if the resource entity-tag does not match the
   specified value.

   The server MUST maintain an entity-tag for the top-level
   {+restconf}/data resource.  This entity-tag is only affected by
   configuration data resources and MUST NOT be updated for changes to
   non-configuration data.  Entity-tags for data resources are discussed
   in Section 3.5.  Note that each representation (e.g., XML vs. JSON)
   requires a different entity-tag.

   If the RESTCONF server is co-located with a NETCONF server, then this
   entity-tag MUST be for the "running" datastore.  Note that it is
   possible that other protocols can cause the entity-tag to be updated.
   Such mechanisms are out of scope for this document.

3.4.1.3.  Update Procedure

   Changes to configuration data resources affect the timestamp and
   entity-tag for that resource, any ancestor data resources, and the
   datastore resource.

   For example, an edit to disable an interface might be done by setting
   the leaf "/interfaces/interface/enabled" to "false".  The "enabled"
   data node and its ancestors (one "interface" list instance, and the
   "interfaces" container) are considered to be changed.  The datastore
   is considered to be changed when any top-level configuration data
   node is changed (e.g., "interfaces").

3.5.  Data Resource

   A data resource represents a YANG data node that is a descendant node
   of a datastore resource.  Each YANG-defined data node can be uniquely
   targeted by the request-line of an HTTP method.  Containers, leafs,
   leaf-list entries, list entries, anydata nodes, and anyxml nodes are
   data resources.

   The representation maintained for each data resource is the
   YANG-defined subtree for that node.  HTTP methods on a data resource
   affect both the targeted data node and all of its descendants,
   if any.

   A data resource can be retrieved with the GET method.  Data resources
   are accessed via the "{+restconf}/data" URI.  This subtree is used to
   retrieve and edit data resources.

3.5.1.  Timestamp

   For configuration data resources, the server MAY maintain a
   last-modified timestamp for the resource and return the
   "Last-Modified" header field when it is retrieved with the GET or
   HEAD methods.

   The "Last-Modified" header field can be used by a RESTCONF client in
   subsequent requests, within the "If-Modified-Since" and
   "If-Unmodified-Since" header fields.

   If maintained, the resource timestamp MUST be set to the current time
   whenever the resource or any configuration resource within the
   resource is altered.  If not maintained, then the resource timestamp
   for the datastore MUST be used instead.  If the RESTCONF server is
   co-located with a NETCONF server, then the last-modified timestamp
   for a configuration data resource MUST represent the instance within
   the "running" datastore.

   This timestamp is only affected by configuration data resources and
   MUST NOT be updated for changes to non-configuration data.

3.5.2.  Entity-Tag

   For configuration data resources, the server SHOULD maintain a
   resource entity-tag for each resource and return the "ETag" header
   field when it is retrieved as the target resource with the GET or
   HEAD methods.  If maintained, the resource entity-tag MUST be updated
   whenever the resource or any configuration resource within the
   resource is altered.  If not maintained, then the resource entity-tag
   for the datastore MUST be used instead.

   The "ETag" header field can be used by a RESTCONF client in
   subsequent requests, within the "If-Match" and "If-None-Match" header
   fields.

   This entity-tag is only affected by configuration data resources and
   MUST NOT be updated for changes to non-configuration data.  If the
   RESTCONF server is co-located with a NETCONF server, then the
   entity-tag for a configuration data resource MUST represent the
   instance within the "running" datastore.

3.5.3.  Encoding Data Resource Identifiers in the Request URI

   In YANG, data nodes can be identified with an absolute XPath
   expression, defined in [XPath], starting from the document root to
   the target resource.  In RESTCONF, URI-encoded path expressions are
   used instead.

   A predictable location for a data resource is important, since
   applications will code to the YANG data model module, which uses
   static naming and defines an absolute path location for all data
   nodes.

   A RESTCONF data resource identifier is encoded from left to right,
   starting with the top-level data node, according to the "api-path"
   rule in Section 3.5.3.1.  The node name of each ancestor of the
   target resource node is encoded in order, ending with the node name
   for the target resource.  If a node in the path is defined in a
   module other than its parent node or its parent is the datastore,
   then the module name followed by a colon character (":") MUST be
   prepended to the node name in the resource identifier.  See
   Section 3.5.3.1 for details.

   If a data node in the path expression is a YANG leaf-list node, then
   the leaf-list value MUST be encoded according to the following rules:

   o  The identifier for the leaf-list MUST be encoded using one path
      segment [RFC3986].

   o  The path segment is constructed by having the leaf-list name,
      followed by an "=" character, followed by the leaf-list value
      (e.g., /restconf/data/top-leaflist=fred).

   o  The leaf-list value is specified as a string, using the canonical
      representation for the YANG data type.  Any reserved characters
      MUST be percent-encoded, according to Sections 2.1 and 2.5 of
      [RFC3986].

   o  YANG 1.1 allows duplicate leaf-list values for non-configuration
      data.  In this case, there is no mechanism to specify the exact
      matching leaf-list instance.

   o  The comma (",") character is percent-encoded [RFC3986], even
      though multiple key values are not possible for a leaf-list.  This
      is more consistent and avoids special processing rules.

   If a data node in the path expression is a YANG list node, then the
   key values for the list (if any) MUST be encoded according to the
   following rules:

   o  The key leaf values for a data resource representing a YANG list
      MUST be encoded using one path segment [RFC3986].

   o  If there is only one key leaf value, the path segment is
      constructed by having the list name, followed by an "=" character,
      followed by the single key leaf value.

   o  If there are multiple key leaf values, the path  
segment is constructed by having the list name,  
followed by an "=" character, 
followed by the value of each leaf identified 
in the "key" statement, encoded in the order
specified in the YANG "key" statement.  Each key 
leaf value except the last one is followed by 
a comma character.
EID 5255 (Verified) is as follows:

Section: 3.5.3.

Original Text:

If there are multiple key leaf values, the path 
segment is constructed by having the list name, 
followed by the value of each leaf identified 
in the "key" statement, encoded in the order
specified in the YANG "key" statement.  Each key 
leaf value except the last one is followed by 
a comma character.

Corrected Text:

If there are multiple key leaf values, the path 
segment is constructed by having the list name,  
followed by an "=" character, 
followed by the value of each leaf identified 
in the "key" statement, encoded in the order
specified in the YANG "key" statement.  Each key 
leaf value except the last one is followed by 
a comma character.
Notes:
When describing the encoding of key values for a list, in the case of multiple keys the "=" equal sign is not mentioned although it is used in the examples.
o The key value is specified as a string, using the canonical representation for the YANG data type. Any reserved characters MUST be percent-encoded, according to Sections 2.1 and 2.5 of [RFC3986]. The comma (",") character MUST be percent-encoded if it is present in the key value. o All of the components in the "key" statement MUST be encoded. Partial instance identifiers are not supported. o Missing key values are not allowed, so two consecutive commas are interpreted as a comma, followed by a zero-length string, followed by a comma. For example, "list1=foo,,baz" would be interpreted as a list named "list1" with three key values, and the second key value is a zero-length string. o Note that non-configuration lists are not required to define keys. In this case, a single list instance cannot be accessed. o The "list-instance" Augmented Backus-Naur Form (ABNF) [RFC5234] rule defined in Section 3.5.3.1 represents the syntax of a list instance identifier. Examples: container top { list list1 { key "key1 key2 key3"; ... list list2 { key "key4 key5"; ... leaf X { type string; } } } leaf-list Y { type uint32; } } For the above YANG definition, the container "top" is defined in the "example-top" YANG module, and a target resource URI for leaf "X" would be encoded as follows: /restconf/data/example-top:top/list1=key1,key2,key3/\ list2=key4,key5/X For the above YANG definition, a target resource URI for leaf-list "Y" would be encoded as follows: /restconf/data/example-top:top/Y=instance-value The following example shows how reserved characters are percent-encoded within a key value. The value of "key1" contains a comma, single-quote, double-quote, colon, double-quote, space, and forward slash (,'":" /). Note that double-quote is not a reserved character and does not need to be percent-encoded. The value of "key2" is the empty string, and the value of "key3" is the string "foo". Example URL: /restconf/data/example-top:top/list1=%2C%27"%3A"%20%2F,,foo 3.5.3.1. ABNF for Data Resource Identifiers The "api-path" ABNF [RFC5234] syntax is used to construct RESTCONF path identifiers. Note that this syntax is used for all resources, and the API path starts with the RESTCONF root resource. Data resources are required to be identified under the "{+restconf}/data" subtree. An identifier is not allowed to start with the case-insensitive string "XML", according to YANG identifier rules. The syntax for "api-identifier" and "key-value" MUST conform to the JSON identifier encoding rules in Section 4 of [RFC7951]: The RESTCONF root resource path is required. Additional sub-resource identifiers are optional. The characters in a key value string are constrained, and some characters need to be percent-encoded, as described in Section 3.5.3. api-path = root *("/" (api-identifier / list-instance)) root = string ;; replacement string for {+restconf} api-identifier = [module-name ":"] identifier module-name = identifier list-instance = api-identifier "=" key-value *("," key-value) key-value = string ;; constrained chars are percent-encoded string = <an unquoted string> identifier = (ALPHA / "_") *(ALPHA / DIGIT / "_" / "-" / ".") 3.5.4. Default Handling RESTCONF requires that a server report its default-handling mode (see Section 9.1.2 for details). If the optional "with-defaults" query parameter is supported by the server, a client may use it to control the retrieval of default values (see Section 4.8.9 for details). If a leaf or leaf-list is missing from the configuration and there is a YANG-defined default for that data resource, then the server MUST use the YANG-defined default as the configured value. If the target of a GET method is a data node that represents a leaf or leaf-list that has a default value and the leaf or leaf-list has not been instantiated yet, the server MUST return the default value or values that are in use by the server. In this case, the server MUST ignore its "basic-mode", described in Section 4.8.9, and return the default value. If the target of a GET method is a data node that represents a container or list that has any child resources with default values, for the child resources that have not been given values yet, the server MAY return the default values that are in use by the server in accordance with its reported default-handling mode and query parameters passed by the client. 3.6. Operation Resource An operation resource represents an RPC operation defined with the YANG "rpc" statement or a data-model-specific action defined with a YANG "action" statement. It is invoked using a POST method on the operation resource. An RPC operation is invoked as: POST {+restconf}/operations/<operation> The <operation> field identifies the module name and rpc identifier string for the desired operation. For example, if "module-A" defined a "reset" RPC operation, then invoking the operation would be requested as follows: POST /restconf/operations/module-A:reset HTTP/1.1 Server: example.com An action is invoked as: POST {+restconf}/data/<data-resource-identifier>/<action> where <data-resource-identifier> contains the path to the data node where the action is defined, and <action> is the name of the action. For example, if "module-A" defined a "reset-all" action in the container "interfaces", then invoking this action would be requested as follows: POST /restconf/data/module-A:interfaces/reset-all HTTP/1.1 Server: example.com If the RPC operation is invoked without errors and if the "rpc" or "action" statement has no "output" section, the response message MUST NOT include a message-body and MUST send a "204 No Content" status-line instead. All operation resources representing RPC operations supported by the server MUST be identified in the "{+restconf}/operations" subtree, defined in Section 3.3.2. Operation resources representing YANG actions are not identified in this subtree, since they are invoked using a URI within the "{+restconf}/data" subtree. 3.6.1. Encoding Operation Resource Input Parameters If the "rpc" or "action" statement has an "input" section, then instances of these input parameters are encoded in the module namespace where the "rpc" or "action" statement is defined, in an XML element or JSON object named "input", which is in the module namespace where the "rpc" or "action" statement is defined. If the "rpc" or "action" statement has an "input" section and the "input" object tree contains any child data nodes that are considered mandatory nodes, then a message-body MUST be sent by the client in the request. If the "rpc" or "action" statement has an "input" section and the "input" object tree does not contain any child nodes that are considered mandatory nodes, then a message-body MAY be sent by the client in the request. If the "rpc" or "action" statement has no "input" section, the request message MUST NOT include a message-body. Examples: The following YANG module is used for the RPC operation examples in this section. module example-ops { namespace "https://example.com/ns/example-ops"; prefix "ops"; organization "Example, Inc."; contact "support at example.com"; description "Example Operations Data Model Module."; revision "2016-07-07" { description "Initial version."; reference "example.com document 3-3373."; } rpc reboot { description "Reboot operation."; input { leaf delay { type uint32; units "seconds"; default 0; description "Number of seconds to wait before initiating the reboot operation."; } leaf message { type string; description "Log message to display when reboot is started."; } leaf language { type string; description "Language identifier string."; reference "RFC 5646."; } } } rpc get-reboot-info { description "Retrieve parameters used in the last reboot operation."; output { leaf reboot-time { type uint32; description "The 'delay' parameter used in the last reboot operation."; } leaf message { type string; description "The 'message' parameter used in the last reboot operation."; } leaf language { type string; description "The 'language' parameter used in the last reboot operation."; } } } } The following YANG module is used for the YANG action examples in this section. module example-actions { yang-version 1.1; namespace "https://example.com/ns/example-actions"; prefix "act"; import ietf-yang-types { prefix yang; } organization "Example, Inc."; contact "support at example.com"; description "Example Actions Data Model Module."; revision "2016-07-07" { description "Initial version."; reference "example.com document 2-9973."; } container interfaces { description "System interfaces."; list interface { key name; description "One interface entry."; leaf name { type string; description "Interface name."; } action reset { description "Reset an interface."; input { leaf delay { type uint32; units "seconds"; default 0; description "Number of seconds to wait before starting the interface reset."; } } } action get-last-reset-time { description "Retrieve the last interface reset time."; output { leaf last-reset { type yang:date-and-time; mandatory true; description "Date and time of the last interface reset, or the last reboot time of the device."; } } } } } } RPC Input Example: The client might send the following POST request message to invoke the "reboot" RPC operation: POST /restconf/operations/example-ops:reboot HTTP/1.1 Host: example.com Content-Type: application/yang-data+xml <input xmlns="https://example.com/ns/example-ops"> <delay>600</delay> <message>Going down for system maintenance</message> <language>en-US</language> </input> The server might respond as follows: HTTP/1.1 204 No Content Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server The same example request message is shown here using JSON encoding: POST /restconf/operations/example-ops:reboot HTTP/1.1 Host: example.com Content-Type: application/yang-data+json { "example-ops:input" : { "delay" : 600, "message" : "Going down for system maintenance", "language" : "en-US" } } Action Input Example: The client might send the following POST request message to invoke the "reset" action: POST /restconf/data/example-actions:interfaces/\ interface=eth0/reset HTTP/1.1 Host: example.com Content-Type: application/yang-data+xml <input xmlns="https://example.com/ns/example-actions"> <delay>600</delay> </input> The server might respond as follows: HTTP/1.1 204 No Content Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server The same example request message is shown here using JSON encoding: POST /restconf/data/example-actions:interfaces/\ interface=eth0/reset HTTP/1.1 Host: example.com Content-Type: application/yang-data+json { "example-actions:input" : { "delay" : 600 } } 3.6.2. Encoding Operation Resource Output Parameters If the "rpc" or "action" statement has an "output" section, then instances of these output parameters are encoded in the module namespace where the "rpc" or "action" statement is defined, in an XML element or JSON object named "output", which is in the module namespace where the "rpc" or "action" statement is defined. If the RPC operation is invoked without errors, and if the "rpc" or "action" statement has an "output" section and the "output" object tree contains any child data nodes that are considered mandatory nodes, then a response message-body MUST be sent by the server in the response. If the RPC operation is invoked without errors, and if the "rpc" or "action" statement has an "output" section and the "output" object tree does not contain any child nodes that are considered mandatory nodes, then a response message-body MAY be sent by the server in the response. The request URI is not returned in the response. Knowledge of the request URI may be needed to associate the output with the specific "rpc" or "action" statement used in the request. Examples: RPC Output Example: The "example-ops" YANG module defined in Section 3.6.1 is used for this example. The client might send the following POST request message to invoke the "get-reboot-info" operation: POST /restconf/operations/example-ops:get-reboot-info HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+json { "example-ops:output" : { "reboot-time" : 30, "message" : "Going down for system maintenance", "language" : "en-US" } } The same response is shown here using XML encoding: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+xml <output xmlns="https://example.com/ns/example-ops"> <reboot-time>30</reboot-time> <message>Going down for system maintenance</message> <language>en-US</language> </output> Action Output Example: The "example-actions" YANG module defined in Section 3.6.1 is used for this example. The client might send the following POST request message to invoke the "get-last-reset-time" action: POST /restconf/data/example-actions:interfaces/\ interface=eth0/get-last-reset-time HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+json { "example-actions:output" : { "last-reset" : "2015-10-10T02:14:11Z" } } 3.6.3. Encoding Operation Resource Errors If any errors occur while attempting to invoke the operation or action, then an "errors" media type is returned with the appropriate error status. If (1) the RPC operation input is not valid or (2) the RPC operation is invoked but errors occur, then a message-body containing an "errors" resource MUST be sent by the server, as defined in Section 3.9. Using the "reboot" RPC operation from the example in Section 3.6.1, the client might send the following POST request message: POST /restconf/operations/example-ops:reboot HTTP/1.1 Host: example.com Content-Type: application/yang-data+xml <input xmlns="https://example.com/ns/example-ops"> <delay>-33</delay> <message>Going down for system maintenance</message> <language>en-US</language> </input> The server might respond with an "invalid-value" error: HTTP/1.1 400 Bad Request Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+xml <errors xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf"> <error> <error-type>protocol</error-type> <error-tag>invalid-value</error-tag> <error-path xmlns:ops="https://example.com/ns/example-ops"> /ops:input/ops:delay </error-path> <error-message>Invalid input parameter</error-message> </error> </errors> The same response is shown here using JSON encoding: HTTP/1.1 400 Bad Request Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+json { "ietf-restconf:errors" : { "error" : [ { "error-type" : "protocol", "error-tag" : "invalid-value", "error-path" : "/example-ops:input/delay", "error-message" : "Invalid input parameter" } ] } } 3.7. Schema Resource The server can optionally support the retrieval of the YANG modules it uses. If retrieval is supported, then the "schema" leaf MUST be present in the associated "module" list entry, defined in [RFC7895]. To retrieve a YANG module, a client first needs to get the URL for retrieving the schema, which is stored in the "schema" leaf. Note that there is no required structure for this URL. The URL value shown below is just an example. The client might send the following GET request message: GET /restconf/data/ietf-yang-library:modules-state/\ module=example-jukebox,2016-08-15/schema HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+json { "ietf-yang-library:schema" : "https://example.com/mymodules/example-jukebox/2016-08-15" } Next, the client needs to retrieve the actual YANG schema. The client might send the following GET request message: GET https://example.com/mymodules/example-jukebox/\ 2016-08-15 HTTP/1.1 Host: example.com Accept: application/yang The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang // entire YANG module contents deleted for this example... 3.8. Event Stream Resource An event stream resource represents a source for system-generated event notifications. Each stream is created and modified by the server only. A client can retrieve a stream resource or initiate a long-poll server-sent event stream [W3C.REC-eventsource-20150203], using the procedure specified in Section 6.3. An event stream functions according to the "NETCONF Event Notifications" specification [RFC5277]. The available streams can be retrieved from the "stream" list, which specifies the syntax and semantics of the stream resources. 3.9. "errors" YANG Data Template The "errors" YANG data template models a collection of error information that is sent as the message-body in a server response message if an error occurs while processing a request message. It is not considered as a resource type because no instances can be retrieved with a GET request. The "ietf-restconf" YANG module contains the "yang-errors" YANG data template, which specifies the syntax and semantics of an "errors" container within a RESTCONF response. RESTCONF error-handling behavior is defined in Section 7. 4. RESTCONF Methods The RESTCONF protocol uses HTTP methods to identify the CRUD operations requested for a particular resource. The following table shows how the RESTCONF operations relate to NETCONF protocol operations. +----------+-------------------------------------------------------+ | RESTCONF | NETCONF | +----------+-------------------------------------------------------+ | OPTIONS | none | | | | | HEAD | <get-config>, <get> | | | | | GET | <get-config>, <get> | | | | | POST | <edit-config> (nc:operation="create") | | | | | POST | invoke an RPC operation | | | | | PUT | <copy-config> (PUT on datastore) | | | | | PUT | <edit-config> (nc:operation="create/replace") | | | | | PATCH | <edit-config> (nc:operation depends on PATCH content) | | | | | DELETE | <edit-config> (nc:operation="delete") | +----------+-------------------------------------------------------+ CRUD Methods in RESTCONF The "remove" edit operation attribute for the NETCONF <edit-config> RPC operation is not supported by the HTTP DELETE method. The resource must exist or the DELETE method will fail. The PATCH method is equivalent to a "merge" edit operation when using a plain patch (see Section 4.6.1); other media types may provide more granular control. Access control mechanisms are used to limit what CRUD operations can be used. In particular, RESTCONF is compatible with the NETCONF Access Control Model (NACM) [RFC6536], as there is a specific mapping between RESTCONF and NETCONF operations. The resource path needs to be converted internally by the server to the corresponding YANG instance identifier. Using this information, the server can apply the NACM access control rules to RESTCONF messages. The server MUST NOT allow any RESTCONF operation for any resources that the client is not authorized to access. The implementation of all methods (except PATCH [RFC5789]) is defined in [RFC7231]. This section defines the RESTCONF protocol usage for each HTTP method. 4.1. OPTIONS The OPTIONS method is sent by the client to discover which methods are supported by the server for a specific resource (e.g., GET, POST, DELETE). The server MUST implement this method. The "Accept-Patch" header field MUST be supported and returned in the response to the OPTIONS request, as defined in [RFC5789]. 4.2. HEAD The RESTCONF server MUST support the HEAD method. The HEAD method is sent by the client to retrieve just the header fields (which contain the metadata for a resource) that would be returned for the comparable GET method, without the response message-body. It is supported for all resources that support the GET method. The request MUST contain a request URI that contains at least the root resource. The same query parameters supported by the GET method are supported by the HEAD method. The access control behavior is enforced as if the method was GET instead of HEAD. The server MUST respond the same as if the method was GET instead of HEAD, except that no response message-body is included. 4.3. GET The RESTCONF server MUST support the GET method. The GET method is sent by the client to retrieve data and metadata for a resource. It is supported for all resource types, except operation resources. The request MUST contain a request URI that contains at least the root resource. The server MUST NOT return any data resources for which the user does not have read privileges. If the user is not authorized to read the target resource, an error response containing a "401 Unauthorized" status-line SHOULD be returned. The error-tag value "access-denied" is returned in this case. A server MAY return a "404 Not Found" status-line, as described in Section 6.5.4 in [RFC7231]. The error-tag value "invalid-value" is returned in this case. If the user is authorized to read some but not all of the target resource, the unauthorized content is omitted from the response message-body, and the authorized content is returned to the client. If any content is returned to the client, then the server MUST send a valid response message-body. More than one element MUST NOT be returned for XML encoding. If multiple elements are sent in a JSON message-body, then they MUST be sent as a JSON array. In this case, any timestamp or entity-tag returned in the response MUST be associated with the first element returned. If a retrieval request for a data resource representing a YANG leaf-list or list object identifies more than one instance and XML encoding is used in the response, then an error response containing a "400 Bad Request" status-line MUST be returned by the server. The error-tag value "invalid-value" is used in this case. Note that a non-configuration list is not required to define any keys. In this case, the retrieval of a single list instance is not possible. If a retrieval request for a data resource represents an instance that does not exist, then an error response containing a "404 Not Found" status-line MUST be returned by the server. The error-tag value "invalid-value" is used in this case. If the target resource of a retrieval request is for an operation resource, then a "405 Method Not Allowed" status-line MUST be returned by the server. The error-tag value "operation-not-supported" is used in this case. Note that the way that access control is applied to data resources may not be completely compatible with HTTP caching. The "Last-Modified" and "ETag" header fields maintained for a data resource are not affected by changes to the access control rules for that data resource. It is possible for the representation of a data resource that is visible to a particular client to be changed without detection via the "Last-Modified" or "ETag" values. Example: The client might request the response header fields for an XML representation of a specific "album" resource: GET /restconf/data/example-jukebox:jukebox/\ library/artist=Foo%20Fighters/album=Wasting%20Light HTTP/1.1 Host: example.com Accept: application/yang-data+xml The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+xml Cache-Control: no-cache ETag: "a74eefc993a2b" Last-Modified: Thu, 26 Jan 2017 14:02:14 GMT <album xmlns="http://example.com/ns/example-jukebox" xmlns:jbox="http://example.com/ns/example-jukebox"> <name>Wasting Light</name> <genre>jbox:alternative</genre> <year>2011</year> </album> Refer to Appendix B.1 for more resource retrieval examples. 4.4. POST The RESTCONF server MUST support the POST method. The POST method is sent by the client to create a data resource or invoke an operation resource. The server uses the target resource type to determine how to process the request. +-----------+------------------------------------------------+ | Type | Description | +-----------+------------------------------------------------+ | Datastore | Create a top-level configuration data resource | | Data | Create a configuration data child resource | | Operation | Invoke an RPC operation | +-----------+------------------------------------------------+ Resource Types That Support POST 4.4.1. Create Resource Mode If the target resource type is a datastore or data resource, then the POST is treated as a request to create a top-level resource or child resource, respectively. The message-body is expected to contain the content of a child resource to create within the parent (target resource). The message-body MUST contain exactly one instance of the expected data resource. The data model for the child tree is the subtree, as defined by YANG for the child resource. The "insert" (Section 4.8.5) and "point" (Section 4.8.6) query parameters MUST be supported by the POST method for datastore and data resources. These parameters are only allowed if the list or leaf-list is "ordered-by user". If the POST method succeeds, a "201 Created" status-line is returned and there is no response message-body. A "Location" header field identifying the child resource that was created MUST be present in the response in this case. If the data resource already exists, then the POST request MUST fail and a "409 Conflict" status-line MUST be returned. The error-tag value "resource-denied" is used in this case. If the user is not authorized to create the target resource, an error response containing a "403 Forbidden" status-line SHOULD be returned. The error-tag value "access-denied" is used in this case. A server MAY return a "404 Not Found" status-line, as described in Section 6.5.4 in [RFC7231]. The error-tag value "invalid-value" is used in this case. All other error responses are handled according to the procedures defined in Section 7. Example: To create a new "jukebox" resource, the client might send the following: POST /restconf/data HTTP/1.1 Host: example.com Content-Type: application/yang-data+json { "example-jukebox:jukebox" : {} } If the resource is created, the server might respond as follows: HTTP/1.1 201 Created Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Location: https://example.com/restconf/data/\ example-jukebox:jukebox Last-Modified: Thu, 26 Jan 2017 20:56:30 GMT ETag: "b3a3e673be2" Refer to Appendix B.2.1 for more resource creation examples. 4.4.2. Invoke Operation Mode If the target resource type is an operation resource, then the POST method is treated as a request to invoke that operation. The message-body (if any) is processed as the operation input parameters. Refer to Section 3.6 for details on operation resources. If the POST request succeeds, a "200 OK" status-line is returned if there is a response message-body, and a "204 No Content" status-line is returned if there is no response message-body. If the user is not authorized to invoke the target operation, an error response containing a "403 Forbidden" status-line SHOULD be returned. The error-tag value "access-denied" is used in this case. A server MAY return a "404 Not Found" status-line, as described in Section 6.5.4 in [RFC7231]. All other error responses are handled according to the procedures defined in Section 7. Example: In this example, the client is invoking the "play" operation defined in the "example-jukebox" YANG module. A client might send a "play" request as follows: POST /restconf/operations/example-jukebox:play HTTP/1.1 Host: example.com Content-Type: application/yang-data+json { "example-jukebox:input" : { "playlist" : "Foo-One", "song-number" : 2 } } The server might respond as follows: HTTP/1.1 204 No Content Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server 4.5. PUT The RESTCONF server MUST support the PUT method. The PUT method is sent by the client to create or replace the target data resource. A request message-body MUST be present, representing the new data resource, or the server MUST return a "400 Bad Request" status-line. The error-tag value "invalid-value" is used in this case. Both the POST and PUT methods can be used to create data resources. The difference is that for POST, the client does not provide the resource identifier for the resource that will be created. The target resource for the POST method for resource creation is the parent of the new resource. The target resource for the PUT method for resource creation is the new resource. The PUT method MUST be supported for data and datastore resources. A PUT on the datastore resource is used to replace the entire contents of the datastore. A PUT on a data resource only replaces that data resource within the datastore. The "insert" (Section 4.8.5) and "point" (Section 4.8.6) query parameters MUST be supported by the PUT method for data resources. These parameters are only allowed if the list or leaf-list is "ordered-by user". Consistent with [RFC7231], if the PUT request creates a new resource, a "201 Created" status-line is returned. If an existing resource is modified, a "204 No Content" status-line is returned. If the user is not authorized to create or replace the target resource, an error response containing a "403 Forbidden" status-line SHOULD be returned. The error-tag value "access-denied" is used in this case. A server MAY return a "404 Not Found" status-line, as described in Section 6.5.4 in [RFC7231]. The error-tag value "invalid-value" is used in this case. All other error responses are handled according to the procedures defined in Section 7. If the target resource represents a YANG leaf-list, then the PUT method MUST NOT change the value of the leaf-list instance. If the target resource represents a YANG list instance, then the key leaf values, in message-body representation, MUST be the same as the key leaf values in the request URI. The PUT method MUST NOT be used to change the key leaf values for a data resource instance. Example: An "album" child resource defined in the "example-jukebox" YANG module is replaced, or it is created if it does not already exist. To replace the "album" resource contents, the client might send the following: PUT /restconf/data/example-jukebox:jukebox/\ library/artist=Foo%20Fighters/album=Wasting%20Light HTTP/1.1 Host: example.com Content-Type: application/yang-data+json { "example-jukebox:album" : [ { "name" : "Wasting Light", "genre" : "example-jukebox:alternative", "year" : 2011 } ] } If the resource is updated, the server might respond as follows: HTTP/1.1 204 No Content Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Last-Modified: Thu, 26 Jan 2017 20:56:30 GMT ETag: "b27480aeda4c" The same request is shown here using XML encoding: PUT /restconf/data/example-jukebox:jukebox/\ library/artist=Foo%20Fighters/album=Wasting%20Light HTTP/1.1 Host: example.com Content-Type: application/yang-data+xml <album xmlns="http://example.com/ns/example-jukebox" xmlns:jbox="http://example.com/ns/example-jukebox"> <name>Wasting Light</name> <genre>jbox:alternative</genre> <year>2011</year> </album> Refer to Appendix B.2.4 for an example using the PUT method to replace the contents of the datastore resource. 4.6. PATCH The RESTCONF server MUST support the PATCH method for a plain patch and MAY support additional media types. The media types for the PATCH method supported by the server can be discovered by the client by sending an OPTIONS request and examining the "Accept-Patch" header field in the response (see Section 4.1). RESTCONF uses the HTTP PATCH method defined in [RFC5789] to provide an extensible framework for resource patching mechanisms. Each patch mechanism needs a unique media type. This document defines one patch mechanism (Section 4.6.1). Another patch mechanism, the YANG Patch mechanism, is defined in [YANG-Patch]. Other patch mechanisms may be defined by future specifications. If the target resource instance does not exist, the server MUST NOT create it. If the PATCH request succeeds, a "200 OK" status-line is returned if there is a message-body, and "204 No Content" is returned if no response message-body is sent. If the user is not authorized to alter the target resource, an error response containing a "403 Forbidden" status-line SHOULD be returned. A server MAY return a "404 Not Found" status-line, as described in Section 6.5.4 in [RFC7231]. The error-tag value "invalid-value" is used in this case. All other error responses are handled according to the procedures defined in Section 7. 4.6.1. Plain Patch The plain patch mechanism merges the contents of the message-body with the target resource. The message-body for a plain patch MUST be present and MUST be represented by the media type "application/yang-data+xml" or "application/yang-data+json". Plain patch can be used to create or update, but not delete, a child resource within the target resource. Please see [YANG-Patch] for an alternate media type supporting the ability to delete child resources. The YANG Patch media type allows multiple suboperations (e.g., "merge", "delete") within a single PATCH method. If the target resource represents a YANG leaf-list, then the PATCH method MUST NOT change the value of the leaf-list instance. If the target resource represents a YANG list instance, then the key leaf values, in message-body representation, MUST be the same as the key leaf values in the request URI. The PATCH method MUST NOT be used to change the key leaf values for a data resource instance. After the plain patch is processed by the server, a response will be returned to the client, as specified in Section 4.6. Example: To replace just the "year" field in the "album" resource (instead of replacing the entire resource with the PUT method), the client might send a plain patch as follows: PATCH /restconf/data/example-jukebox:jukebox/\ library/artist=Foo%20Fighters/album=Wasting%20Light HTTP/1.1 Host: example.com If-Match: "b8389233a4c" Content-Type: application/yang-data+xml <album xmlns="http://example.com/ns/example-jukebox"> <year>2011</year> </album> If the field is updated, the server might respond as follows: HTTP/1.1 204 No Content Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Last-Modified: Thu, 26 Jan 2017 20:56:30 GMT ETag: "b2788923da4c" 4.7. DELETE The RESTCONF server MUST support the DELETE method. The DELETE method is used to delete the target resource. If the DELETE request succeeds, a "204 No Content" status-line is returned. If the user is not authorized to delete the target resource, then an error response containing a "403 Forbidden" status-line SHOULD be returned. The error-tag value "access-denied" is returned in this case. A server MAY return a "404 Not Found" status-line, as described in Section 6.5.4 in [RFC7231]. The error-tag value "invalid-value" is returned in this case. All other error responses are handled according to the procedures defined in Section 7. If the target resource represents a configuration leaf-list or list data node, then it MUST represent a single YANG leaf-list or list instance. The server MUST NOT use the DELETE method to delete more than one such instance. Example: To delete the "album" resource with the key "Wasting Light", the client might send the following: DELETE /restconf/data/example-jukebox:jukebox/\ library/artist=Foo%20Fighters/album=Wasting%20Light HTTP/1.1 Host: example.com If the resource is deleted, the server might respond as follows: HTTP/1.1 204 No Content Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server 4.8. Query Parameters Each RESTCONF operation allows zero or more query parameters to be present in the request URI. Which specific parameters are allowed will depend on the resource type, and sometimes the specific target resource used, in the request. o Query parameters can be given in any order. o Each parameter can appear at most once in a request URI. o If more than one instance of a query parameter is present, then a "400 Bad Request" status-line MUST be returned by the server. The error-tag value "invalid-value" is returned in this case. o A default value may apply if the parameter is missing. o Query parameter names and values are case sensitive. o A server MUST return an error with a "400 Bad Request" status-line if a query parameter is unexpected. The error-tag value "invalid-value" is returned in this case. +---------------+---------+-----------------------------------------+ | Name | Methods | Description | +---------------+---------+-----------------------------------------+ | content | GET, | Select config and/or non-config data | | | HEAD | resources | | | | | | depth | GET, | Request limited subtree depth in the | | | HEAD | reply content | | | | | | fields | GET, | Request a subset of the target resource | | | HEAD | contents | | | | | | filter | GET, | Boolean notification filter for event | | | HEAD | stream resources | | | | | | insert | POST, | Insertion mode for "ordered-by user" | | | PUT | data resources | | | | | | point | POST, | Insertion point for "ordered-by user" | | | PUT | data resources | | | | | | start-time | GET, | Replay buffer start time for event | | | HEAD | stream resources | | | | | | stop-time | GET, | Replay buffer stop time for event | | | HEAD | stream resources | | | | | | with-defaults | GET, | Control the retrieval of default values | | | HEAD | | +---------------+---------+-----------------------------------------+ RESTCONF Query Parameters Refer to Appendix B.3 for examples of query parameter usage. If vendors define additional query parameters, they SHOULD use a prefix (such as the enterprise or organization name) for query parameter names in order to avoid collisions with other parameters. 4.8.1. The "content" Query Parameter The "content" query parameter controls how descendant nodes of the requested data nodes will be processed in the reply. The allowed values are: +-----------+-----------------------------------------------------+ | Value | Description | +-----------+-----------------------------------------------------+ | config | Return only configuration descendant data nodes | | | | | nonconfig | Return only non-configuration descendant data nodes | | | | | all | Return all descendant data nodes | +-----------+-----------------------------------------------------+ This parameter is only allowed for GET methods on datastore and data resources. A "400 Bad Request" status-line is returned if used for other methods or resource types. If this query parameter is not present, the default value is "all". This query parameter MUST be supported by the server. 4.8.2. The "depth" Query Parameter The "depth" query parameter is used to limit the depth of subtrees returned by the server. Data nodes with a "depth" value greater than the "depth" parameter are not returned in a response for a GET method. The requested data node has a depth level of "1". If the "fields" parameter (Section 4.8.3) is used to select descendant data nodes, then these nodes and all of their ancestor nodes have a "depth" value of "1". (This has the effect of including the nodes specified by the fields, even if the "depth" value is less than the actual depth level of the specified fields.) Any other child node has a "depth" value that is 1 greater than its parent. The value of the "depth" parameter is either an integer between 1 and 65535 or the string "unbounded". "unbounded" is the default. This parameter is only allowed for GET methods on API, datastore, and data resources. A "400 Bad Request" status-line is returned if used for other methods or resource types. By default, the server will include all sub-resources within a retrieved resource that have the same resource type as the requested resource. The exception is the datastore resource. If this resource type is retrieved, then by default the datastore and all child data resources are returned. If the "depth" query parameter URI is listed in the "capability" leaf-list defined in Section 9.3, then the server supports the "depth" query parameter. 4.8.3. The "fields" Query Parameter The "fields" query parameter is used to optionally identify data nodes within the target resource to be retrieved in a GET method. The client can use this parameter to retrieve a subset of all nodes in a resource. The server will return a message-body representing the target resource, with descendant nodes pruned as specified in the "fields-expr" value. The server does not return a set of separate sub-resources. A value of the "fields" query parameter matches the following rule: fields-expr = path "(" fields-expr ")" / path ";" fields-expr / path path = api-identifier [ "/" path ] "api-identifier" is defined in Section 3.5.3.1. ";" is used to select multiple nodes. For example, to retrieve only the "genre" and "year" of an album, use "fields=genre;year". Parentheses are used to specify sub-selectors of a node. Note that there is no path separator character "/" between a "path" field and a left parenthesis character "(". For example, assume that the target resource is the "album" list. To retrieve only the "label" and "catalogue-number" of the "admin" container within an album, use "fields=admin(label;catalogue-number)". "/" is used in a path to retrieve a child node of a node. For example, to retrieve only the "label" of an album, use "fields=admin/label". This parameter is only allowed for GET methods on API, datastore, and data resources. A "400 Bad Request" status-line is returned if used for other methods or resource types. If the "fields" query parameter URI is listed in the "capability" leaf-list defined in Section 9.3, then the server supports the "fields" parameter. 4.8.4. The "filter" Query Parameter The "filter" query parameter is used to indicate which subset of all possible events is of interest. If not present, all events not precluded by other parameters will be sent. This parameter is only allowed for GET methods on an event stream resource. A "400 Bad Request" status-line is returned if used for other methods or resource types. The format of this parameter is an XPath 1.0 expression [XPath] and is evaluated in the following context: o The set of namespace declarations is the set of prefix and namespace pairs for all supported YANG modules, where the prefix is the YANG module name and the namespace is as defined by the "namespace" statement in the YANG module. o The function library is the core function library defined in XPath 1.0, plus any functions defined by the data model. o The set of variable bindings is empty. o The context node is the root node. The "filter" query parameter is used as defined in Section 3.6 of [RFC5277]. If the boolean result of the expression is "true" when applied to the conceptual "notification" document root, then the event notification is delivered to the client. If the "filter" query parameter URI is listed in the "capability" leaf-list defined in Section 9.3, then the server supports the "filter" query parameter. 4.8.5. The "insert" Query Parameter The "insert" query parameter is used to specify how a resource should be inserted within an "ordered-by user" list. The allowed values are: +--------+----------------------------------------------------------+ | Value | Description | +--------+----------------------------------------------------------+ | first | Insert the new data as the new first entry. | | | | | last | Insert the new data as the new last entry. | | | | | before | Insert the new data before the insertion point, as | | | specified by the value of the "point" parameter. | | | | | after | Insert the new data after the insertion point, as | | | specified by the value of the "point" parameter. | +--------+----------------------------------------------------------+ The default value is “last”, except when used with PUT and the target resource already exists, in which case the default is to replace the target resource without altering its position in the "ordered-by user” list or leaf-list.
EID 6277 (Verified) is as follows:

Section: 4.8.5

Original Text:

The default value is "last".

Corrected Text:

The default value is “last”, except when used with PUT 
and the target resource already exists, in which case the 
default is to replace the target resource without altering
its position in the "ordered-by user” list or leaf-list.
Notes:
The "last" default is intended for when creating a new element.

A PUT operation that replaces a list or leaf-list entry should not move the entry unless the "insert" parameter is explicitly passed.
This parameter is only supported for the POST and PUT methods. It is also only supported if the target resource is a data resource, and that data represents a YANG list or leaf-list that is "ordered-by user". If the values "before" or "after" are used, then a "point" query parameter for the "insert" query parameter MUST also be present, or a "400 Bad Request" status-line is returned. The "insert" query parameter MUST be supported by the server. 4.8.6. The "point" Query Parameter The "point" query parameter is used to specify the insertion point for a data resource that is being created or moved within an "ordered-by user" list or leaf-list. The value of the "point" parameter is a string that identifies the path to the insertion point object. The format is the same as a target resource URI string. This parameter is only supported for the POST and PUT methods. It is also only supported if the target resource is a data resource, and that data represents a YANG list or leaf-list that is "ordered-by user". If the "insert" query parameter is not present or has a value other than "before" or "after", then a "400 Bad Request" status-line is returned. This parameter contains the instance identifier of the resource to be used as the insertion point for a POST or PUT method. The "point" query parameter MUST be supported by the server. 4.8.7. The "start-time" Query Parameter The "start-time" query parameter is used to trigger the notification replay feature defined in [RFC5277] and indicate that the replay should start at the time specified. If the stream does not support replay per the "replay-support" attribute returned by the "stream" list entry for the stream resource, then the server MUST return a "400 Bad Request" status-line. The value of the "start-time" parameter is of type "date-and-time", defined in the "ietf-yang-types" YANG module [RFC6991]. This parameter is only allowed for GET methods on a "text/event-stream" data resource. A "400 Bad Request" status-line is returned if used for other methods or resource types. If this parameter is not present, then a replay subscription is not being requested. It is not valid to specify start times that are later than the current time. If the value specified is earlier than the log can support, the replay will begin with the earliest available notification. A client can obtain a server's current time by examining the "Date" header field that the server returns in response messages, according to [RFC7231]. If this query parameter is supported by the server, then the "replay" query parameter URI MUST be listed in the "capability" leaf-list defined in Section 9.3, and the "stop-time" query parameter MUST also be supported by the server. If the "replay-support" leaf has the value "true" in the "stream" entry (defined in Section 9.3), then the server MUST support the "start-time" and "stop-time" query parameters for that stream. 4.8.8. The "stop-time" Query Parameter The "stop-time" query parameter is used with the replay feature to indicate the newest notifications of interest. This parameter MUST be used with, and have a value later than, the "start-time" parameter. The value of the "stop-time" parameter is of type "date-and-time", defined in the "ietf-yang-types" YANG module [RFC6991]. This parameter is only allowed for GET methods on a "text/event-stream" data resource. A "400 Bad Request" status-line is returned if used for other methods or resource types. If this parameter is not present, the notifications will continue until the subscription is terminated. Values in the future are valid. If this query parameter is supported by the server, then the "replay" query parameter URI MUST be listed in the "capability" leaf-list defined in Section 9.3, and the "start-time" query parameter MUST also be supported by the server. If the "replay-support" leaf is present in the "stream" entry (defined in Section 9.3), then the server MUST support the "start-time" and "stop-time" query parameters for that stream. 4.8.9. The "with-defaults" Query Parameter The "with-defaults" query parameter is used to specify how information about default data nodes should be returned in response to GET requests on data resources. If the server supports this capability, then it MUST implement the behavior described in Section 4.5.1 of [RFC6243], except applied to the RESTCONF GET operation instead of the NETCONF operations. +-------------------+-----------------------------------------------+ | Value | Description | +-------------------+-----------------------------------------------+ | report-all | All data nodes are reported | | | | | trim | Data nodes set to the YANG default are not | | | reported | | | | | explicit | Data nodes set to the YANG default by the | | | client are reported | | | | | report-all-tagged | All data nodes are reported, and defaults are | | | tagged | +-------------------+-----------------------------------------------+ If the "with-defaults" parameter is set to "report-all", then the server MUST adhere to the default-reporting behavior defined in Section 3.1 of [RFC6243]. If the "with-defaults" parameter is set to "trim", then the server MUST adhere to the default-reporting behavior defined in Section 3.2 of [RFC6243]. If the "with-defaults" parameter is set to "explicit", then the server MUST adhere to the default-reporting behavior defined in Section 3.3 of [RFC6243]. If the "with-defaults" parameter is set to "report-all-tagged", then the server MUST adhere to the default-reporting behavior defined in Section 3.4 of [RFC6243]. Metadata is reported by the server as specified in Section 5.3. The XML encoding for the "default" attribute sent by the server for default nodes is defined in Section 6 of [RFC6243]. The JSON encoding for the "default" attribute MUST use the same values, as defined in [RFC6243], but encoded according to the rules in [RFC7952]. The module name "ietf-netconf-with-defaults" MUST be used for the "default" attribute. If the "with-defaults" parameter is not present, then the server MUST adhere to the default-reporting behavior defined in its "basic-mode" parameter for the "defaults" protocol capability URI, defined in Section 9.1.2. If the server includes the "with-defaults" query parameter URI in the "capability" leaf-list defined in Section 9.3, then the "with-defaults" query parameter MUST be supported. Since the server does not report the "also-supported" parameter as described in Section 4.3 of [RFC6243], it is possible that some values for the "with-defaults" parameter will not be supported. If the server does not support the requested value of the "with-defaults" parameter, the server MUST return a response with a "400 Bad Request" status-line. The error-tag value "invalid-value" is used in this case. 5. Messages The RESTCONF protocol uses HTTP messages. A single HTTP message corresponds to a single protocol method. Most messages can perform a single task on a single resource, such as retrieving a resource or editing a resource. The exception is the PATCH method, which allows multiple datastore edits within a single message. 5.1. Request URI Structure Resources are represented with URIs following the structure for generic URIs in [RFC3986]. A RESTCONF operation is derived from the HTTP method and the request URI, using the following conceptual fields: <OP> /<restconf>/<path>?<query> ^ ^ ^ ^ | | | | method entry resource query M M O O M=mandatory, O=optional where: <OP> is the HTTP method <restconf> is the RESTCONF root resource <path> is the target resource URI <query> is the query parameter list o method: the HTTP method identifying the RESTCONF operation requested by the client, to act upon the target resource specified in the request URI. RESTCONF operation details are described in Section 4. o entry: the root of the RESTCONF API configured on this HTTP server, discovered by getting the "/.well-known/host-meta" resource, as described in Section 3.1. o resource: the path expression identifying the resource that is being accessed by the RESTCONF operation. If this field is not present, then the target resource is the API itself, represented by the YANG data template named "yang-api", found in Section 8. o query: the set of parameters associated with the RESTCONF message; see Section 3.4 of [RFC3986]. RESTCONF parameters have the familiar form of "name=value" pairs. Most query parameters are optional to implement by the server and optional to use by the client. Each optional query parameter is identified by a URI. The server MUST list the optional query parameter URIs it supports in the "capability" leaf-list defined in Section 9.3. There is a specific set of parameters defined, although the server MAY choose to support query parameters not defined in this document. The contents of any query parameter value MUST be encoded according to Section 3.4 of [RFC3986]. Any reserved characters MUST be percent-encoded, according to Sections 2.1 and 2.5 of [RFC3986]. Note that the fragment component is not used by the RESTCONF protocol. The fragment is excluded from the target URI by a server, as described in Section 5.1 of [RFC7230]. When new resources are created by the client, a "Location" header field is returned, which identifies the path of the newly created resource. The client uses this exact path identifier to access the resource once it has been created. The target of a RESTCONF operation is a resource. The "path" field in the request URI represents the target resource for the RESTCONF operation. Refer to Appendix B for examples of RESTCONF request URIs. 5.2. Message Encoding RESTCONF messages are encoded in HTTP according to [RFC7230]. The "utf-8" character set is used for all messages. RESTCONF message content is sent in the HTTP message-body. Content is encoded in either JSON or XML format. A server MUST support one of either XML or JSON encoding. A server MAY support both XML and JSON encoding. A client will need to support both XML and JSON to interoperate with all RESTCONF servers. XML encoding rules for data nodes are defined in [RFC7950]. The same encoding rules are used for all XML content. JSON encoding rules are defined in [RFC7951]. Additional JSON encoding rules for metadata are defined in [RFC7952]. This encoding is valid JSON, but it also has special encoding rules to identify module namespaces and provide consistent type processing of YANG data. The request input content encoding format is identified with the "Content-Type" header field. This field MUST be present if a message-body is sent by the client. The server MUST support the "Accept" header field and the "406 Not Acceptable" status-line, as defined in [RFC7231]. The response output content encoding formats that the client will accept are identified with the "Accept" header field in the request. If it is not specified, the request input encoding format SHOULD be used, or the server MAY choose any supported content encoding format. If there was no request input, then the default output encoding is XML or JSON, depending on server preference. File extensions encoded in the request are not used to identify format encoding. A client can determine if the RESTCONF server supports an encoding format by sending a request using a specific format in the "Content-Type" and/or "Accept" header field. If the server does not support the requested input encoding for a request, then it MUST return an error response with a "415 Unsupported Media Type" status-line. If the server does not support any of the requested output encodings for a request, then it MUST return an error response with a "406 Not Acceptable" status-line. 5.3. RESTCONF Metadata The RESTCONF protocol needs to support the retrieval of the same metadata that is used in the NETCONF protocol. Information about default leafs, last-modified timestamps, etc. is commonly used to annotate representations of the datastore contents. With the XML encoding, the metadata is encoded as attributes in XML, according to Section 3.3 of [W3C.REC-xml-20081126]. With the JSON encoding, the metadata is encoded as specified in [RFC7952]. The following examples are based on the example in Appendix B.3.9. The "report-all-tagged" mode for the "with-defaults" query parameter requires that a "default" attribute be returned for default nodes. These examples show that attribute for the "mtu" leaf. 5.3.1. XML Metadata Encoding Example GET /restconf/data/interfaces/interface=eth1 ?with-defaults=report-all-tagged HTTP/1.1 Host: example.com Accept: application/yang-data+xml The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+xml <interface xmlns="urn:example.com:params:xml:ns:yang:example-interface"> <name>eth1</name> <mtu xmlns:wd="urn:ietf:params:xml:ns:netconf:default:1.0" wd:default="true">1500</mtu> <status>up</status> </interface> 5.3.2. JSON Metadata Encoding Example Note that RFC 6243 defines the "default" attribute with the XML Schema Definition (XSD), not YANG, so the YANG module name has to be assigned instead of derived from the YANG module. The value "ietf-netconf-with-defaults" is assigned for JSON metadata encoding. GET /restconf/data/interfaces/interface=eth1\ ?with-defaults=report-all-tagged HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+json { "example:interface" : [ { "name" : "eth1", "mtu" : 1500, "@mtu" : { "ietf-netconf-with-defaults:default" : true }, "status" : "up" } ] } 5.4. Return Status Each message represents some sort of resource access. An HTTP "status-line" header field is returned for each request. If a status code in the "4xx" range is returned in the status-line, then the error information SHOULD be returned in the response, according to the format defined in Section 7.1. If a status code in the "5xx" range is returned in the status-line, then the error information MAY be returned in the response, according to the format defined in Section 7.1. If a status code in the "1xx", "2xx", or "3xx" range is returned in the status-line, then error information MUST NOT be returned in the response, since these ranges do not represent error conditions. 5.5. Message Caching Since the datastore contents change at unpredictable times, responses from a RESTCONF server generally SHOULD NOT be cached. The server MUST include a "Cache-Control" header field in every response that specifies whether the response should be cached. Instead of relying on HTTP caching, the client SHOULD track the "ETag" and/or "Last-Modified" header fields returned by the server for the datastore resource (or data resource, if the server supports it). A retrieval request for a resource can include the "If-None-Match" and/or "If-Modified-Since" header fields, which will cause the server to return a "304 Not Modified" status-line if the resource has not changed. The client MAY use the HEAD method to retrieve just the message header fields, which SHOULD include the "ETag" and "Last-Modified" header fields, if this metadata is maintained for the target resource. Note that access control can be applied to data resources, such that the values in the "Last-Modified" and "ETag" headers maintained for a data resource may not be reliable, as described in Section 4.3. 6. Notifications The RESTCONF protocol supports YANG-defined event notifications. The solution preserves aspects of NETCONF event notifications [RFC5277] while utilizing the Server-Sent Events [W3C.REC-eventsource-20150203] transport strategy. 6.1. Server Support A RESTCONF server MAY support RESTCONF notifications. Clients may determine if a server supports RESTCONF notifications by using the HTTP OPTIONS, HEAD, or GET method on the "stream" list. The server does not support RESTCONF notifications if an HTTP error code is returned (e.g., a "404 Not Found" status-line). 6.2. Event Streams A RESTCONF server that supports notifications will populate a stream resource for each notification delivery service access point. A RESTCONF client can retrieve the list of supported event streams from a RESTCONF server using the GET method on the "stream" list. The "restconf-state/streams" container definition in the "ietf-restconf-monitoring" module (defined in Section 9.3) is used to specify the structure and syntax of the conceptual child resources within the "streams" resource. For example: The client might send the following request: GET /restconf/data/ietf-restconf-monitoring:restconf-state/\ streams HTTP/1.1 Host: example.com Accept: application/yang-data+xml The server might send the following response: HTTP/1.1 200 OK Content-Type: application/yang-data+xml <streams xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf-monitoring"> <stream> <name>NETCONF</name> <description>default NETCONF event stream</description> <replay-support>true</replay-support> <replay-log-creation-time>\ 2007-07-08T00:00:00Z\ </replay-log-creation-time> <access> <encoding>xml</encoding> <location>https://example.com/streams/NETCONF\ </location> </access> <access> <encoding>json</encoding> <location>https://example.com/streams/NETCONF-JSON\ </location> </access> </stream> <stream> <name>SNMP</name> <description>SNMP notifications</description> <replay-support>false</replay-support> <access> <encoding>xml</encoding> <location>https://example.com/streams/SNMP</location> </access> </stream> <stream> <name>syslog-critical</name> <description>Critical and higher severity</description> <replay-support>true</replay-support> <replay-log-creation-time> 2007-07-01T00:00:00Z </replay-log-creation-time> <access> <encoding>xml</encoding> <location>\ https://example.com/streams/syslog-critical\ </location> </access> </stream> </streams> 6.3. Subscribing to Receive Notifications RESTCONF clients can determine the URL for the subscription resource (to receive notifications) by sending an HTTP GET request for the "location" leaf with the "stream" list entry. The value returned by the server can be used for the actual notification subscription. The client will send an HTTP GET request for the URL returned by the server with the "Accept" type "text/event-stream". The server will treat the connection as an event stream, using the Server-Sent Events [W3C.REC-eventsource-20150203] transport strategy. The server MAY support query parameters for a GET method on this resource. These parameters are specific to each event stream. For example: The client might send the following request: GET /restconf/data/ietf-restconf-monitoring:restconf-state/\ streams/stream=NETCONF/access=xml/location HTTP/1.1 Host: example.com Accept: application/yang-data+xml The server might send the following response: HTTP/1.1 200 OK Content-Type: application/yang-data+xml <location xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf-monitoring">\ https://example.com/streams/NETCONF\ </location> The RESTCONF client can then use this URL value to start monitoring the event stream: GET /streams/NETCONF HTTP/1.1 Host: example.com Accept: text/event-stream Cache-Control: no-cache Connection: keep-alive A RESTCONF client MAY request that the server compress the events using the HTTP header field "Accept-Encoding". For instance: GET /streams/NETCONF HTTP/1.1 Host: example.com Accept: text/event-stream Cache-Control: no-cache Connection: keep-alive Accept-Encoding: gzip, deflate 6.3.1. NETCONF Event Stream The server SHOULD support the NETCONF event stream defined in Section 3.2.3 of [RFC5277]. The notification messages for this stream are encoded in XML. The server MAY support additional streams that represent the semantic content of the NETCONF event stream, but using a representation with a different media type. The server MAY support the "start-time", "stop-time", and "filter" query parameters, defined in Section 4.8. Refer to Appendix B.3.6 for filter parameter examples. 6.4. Receiving Event Notifications RESTCONF notifications are encoded according to the definition of the event stream. The structure of the event data is based on the <notification> element definition in Section 4 of [RFC5277]. It MUST conform to the schema for the <notification> element in Section 4 of [RFC5277], using the XML namespace as defined in the XSD as follows: urn:ietf:params:xml:ns:netconf:notification:1.0 For JSON-encoding purposes, the module name for the "notification" element is "ietf-restconf". Two child nodes within the "notification" container are expected, representing the event time and the event payload. The "eventTime" node is defined within the same XML namespace as the <notification> element. It is defined to be within the "ietf-restconf" module namespace for JSON-encoding purposes. The name and namespace of the payload element are determined by the YANG module containing the notification-stmt representing the notification message. In the following example, the YANG module "example-mod" is used: module example-mod { namespace "http://example.com/event/1.0"; prefix ex; organization "Example, Inc."; contact "support at example.com"; description "Example Notification Data Model Module."; revision "2016-07-07" { description "Initial version."; reference "example.com document 2-9976."; } notification event { description "Example notification event."; leaf event-class { type string; description "Event class identifier."; } container reporting-entity { description "Event specific information."; leaf card { type string; description "Line card identifier."; } } leaf severity { type string; description "Event severity description."; } } } An example SSE event notification encoded using XML: data: <notification data: xmlns="urn:ietf:params:xml:ns:netconf:notification:1.0"> data: <eventTime>2013-12-21T00:01:00Z</eventTime> data: <event xmlns="http://example.com/event/1.0"> data: <event-class>fault</event-class> data: <reporting-entity> data: <card>Ethernet0</card> data: </reporting-entity> data: <severity>major</severity> data: </event> data: </notification> An example SSE event notification encoded using JSON: data: { data: "ietf-restconf:notification" : { data: "eventTime" : "2013-12-21T00:01:00Z", data: "example-mod:event" : { data: "event-class" : "fault", data: "reporting-entity" : { "card" : "Ethernet0" }, data: "severity" : "major" data: } data: } data: } Alternatively, since neither XML nor JSON is whitespace sensitive, the above messages can be encoded onto a single line. For example: XML: data: <notification xmlns="urn:ietf:params:xml:ns:netconf:notif\ ication:1.0"><eventTime>2013-12-21T00:01:00Z</eventTime><event \ xmlns="http://example.com/event/1.0"><event-class>fault</event-\ class><reportingEntity><card>Ethernet0</card></reporting-entity>\ <severity>major</severity></event></notification> JSON: data: {"ietf-restconf:notification":{"eventTime":"2013-12-21\ T00:01:00Z","example-mod:event":{"event-class": "fault","repor\ tingEntity":{"card":"Ethernet0"},"severity":"major"}}} The SSE specification supports the following additional fields: "event", "id", and "retry". A RESTCONF server MAY send the "retry" field, and if it does, RESTCONF clients SHOULD use it. A RESTCONF server SHOULD NOT send the "event" or "id" fields, as there are no meaningful values that could be used for them that would not be redundant to the contents of the notification itself. RESTCONF servers that do not send the "id" field also do not need to support the HTTP header field "Last-Event-ID" [W3C.REC-eventsource-20150203]. RESTCONF servers that do send the "id" field SHOULD support the "start-time" query parameter as the preferred means for a client to specify where to restart the event stream. 7. Error Reporting
EID 7311 (Verified) is as follows:

Section: 7

Original Text:

              +-------------------------+------------------+
              | error-tag               | status code      |
              +-------------------------+------------------+
(...)
              | unknown-attribute       | 400              |
              |                         |                  |
              | bad-element             | 400              |
(...)

Corrected Text:

              +-------------------------+------------------+
              | error-tag               | status code      |
              +-------------------------+------------------+
(...)
              | unknown-attribute       | 400              |
              |                         |                  |
              | missing-element         | 400              |
              |                         |                  |
              | bad-element             | 400              |
(...)
Notes:
Add missing-element to the table Mapping from <error-tag> to Status Code
in Section 7.

The NETCONF error-tag missing-element is not listed in the table mapping
error-tag to HTTP status code. This seems to be a mistake since all other
error-tags are listed (even the obsolete partial-operation which should not
be used according to RFC 6241).
HTTP status codes are used to report success or failure for RESTCONF operations. The error information that NETCONF error responses contain in the <rpc-error> element is adapted for use in RESTCONF, and <errors> data tree information is returned for the "4xx" and "5xx" classes of status codes. Since an operation resource is defined with a YANG "rpc" statement and an action is defined with a YANG "action" statement, a mapping from the NETCONF <error-tag> value to the HTTP status code is needed. The specific error-tag and response code to use are specific to the data model and might be contained in the YANG "description" statement for the "action" or "rpc" statement. +-------------------------+------------------+ | error-tag | status code | +-------------------------+------------------+ | in-use | 409 | | | | | invalid-value | 400, 404, or 406 | | | | | (request) too-big | 413 | | | | | (response) too-big | 400 | | | | | missing-attribute | 400 | | | | | bad-attribute | 400 | | | | | unknown-attribute | 400 | | | | | bad-element | 400 | | | | | unknown-element | 400 | | | | | unknown-namespace | 400 | | | | | access-denied | 401 or 403 | | | | | lock-denied | 409 | | | | | resource-denied | 409 | | | | | rollback-failed | 500 | | | | | data-exists | 409 | | | | | data-missing | 409 | | | | | operation-not-supported | 405 or 501 | | | | | operation-failed | 412 or 500 | | | | | partial-operation | 500 | | | | | malformed-message | 400 | +-------------------------+------------------+ Mapping from <error-tag> to Status Code 7.1. Error Response Message When an error occurs for a request message on any resource type and the status code that will be returned is in the "4xx" range (except for status code "403 Forbidden"), the server SHOULD send a response message-body containing the information described by the "yang-errors" YANG data template within the "ietf-restconf" module found in Section 8. The Content-Type of this response message MUST be "application/yang-data", plus, optionally, a structured syntax name suffix. The client SHOULD specify the desired encoding(s) for response messages by specifying the appropriate media type(s) in the "Accept" header. If the client did not specify an "Accept" header, then the same structured syntax name suffix used in the request message SHOULD be used, or the server MAY choose any supported message-encoding format. If there is no request message, the server MUST select "application/yang-data+xml" or "application/yang-data+json", depending on server preference. All of the examples in this document, except for the one below, assume that XML encoding will be returned if there is an error. YANG tree diagram for <errors> data: +---- errors +---- error* +---- error-type enumeration +---- error-tag string +---- error-app-tag? string +---- error-path? instance-identifier +---- error-message? string +---- error-info? The semantics and syntax for RESTCONF error messages are defined with the "yang-errors" YANG data template extension, found in Section 8. Examples: The following example shows an error returned for a "lock-denied" error that can occur if a NETCONF client has locked a datastore. The RESTCONF client is attempting to delete a data resource. Note that an "Accept" header field is used to specify the desired encoding for the error message. There would be no response message-body content if this operation was successful. DELETE /restconf/data/example-jukebox:jukebox/\ library/artist=Foo%20Fighters/album=Wasting%20Light HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 409 Conflict Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+json { "ietf-restconf:errors" : { "error" : [ { "error-type" : "protocol", "error-tag" : "lock-denied", "error-message" : "Lock failed; lock already held" } ] } } The following example shows an error returned for a "data-exists" error on a data resource. The "jukebox" resource already exists, so it cannot be created. The client might send the following: POST /restconf/data/example-jukebox:jukebox HTTP/1.1 Host: example.com The server might respond as follows: HTTP/1.1 409 Conflict Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+xml <errors xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf"> <error> <error-type>protocol</error-type> <error-tag>data-exists</error-tag> <error-path xmlns:rc="urn:ietf:params:xml:ns:yang:ietf-restconf" xmlns:jbox="https://example.com/ns/example-jukebox">\ /rc:restconf/rc:data/jbox:jukebox </error-path> <error-message> Data already exists; cannot create new resource </error-message> </error> </errors> 8. RESTCONF Module The "ietf-restconf" module defines conceptual definitions within an extension and two groupings, which are not meant to be implemented as datastore contents by a server. For example, the "restconf" container is not intended to be implemented as a top-level data node (under the "/restconf/data" URI). Note that the "ietf-restconf" module does not have any protocol-accessible objects, so no YANG tree diagram is shown. <CODE BEGINS> file "ietf-restconf@2017-01-26.yang" module ietf-restconf { yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-restconf"; prefix "rc"; organization "IETF NETCONF (Network Configuration) Working Group"; contact "WG Web: <https://datatracker.ietf.org/wg/netconf/> WG List: <mailto:netconf@ietf.org> Author: Andy Bierman <mailto:andy@yumaworks.com> Author: Martin Bjorklund <mailto:mbj@tail-f.com> Author: Kent Watsen <mailto:kwatsen@juniper.net>"; description "This module contains conceptual YANG specifications for basic RESTCONF media type definitions used in RESTCONF protocol messages. Note that the YANG definitions within this module do not represent configuration data of any kind. The 'restconf-media-type' YANG extension statement provides a normative syntax for XML and JSON message-encoding purposes. Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of RFC 8040; see the RFC itself for full legal notices."; revision 2017-01-26 { description "Initial revision."; reference "RFC 8040: RESTCONF Protocol."; } extension yang-data { argument name { yin-element true; } description "This extension is used to specify a YANG data template that represents conceptual data defined in YANG. It is intended to describe hierarchical data independent of protocol context or specific message-encoding format. Data definition statements within a yang-data extension specify the generic syntax for the specific YANG data template, whose name is the argument of the 'yang-data' extension statement. Note that this extension does not define a media type. A specification using this extension MUST specify the message-encoding rules, including the content media type. The mandatory 'name' parameter value identifies the YANG data template that is being defined. It contains the template name. This extension is ignored unless it appears as a top-level statement. It MUST contain data definition statements that result in exactly one container data node definition. An instance of a YANG data template can thus be translated into an XML instance document, whose top-level element corresponds to the top-level container. The module name and namespace values for the YANG module using the extension statement are assigned to instance document data conforming to the data definition statements within this extension. The substatements of this extension MUST follow the 'data-def-stmt' rule in the YANG ABNF. The XPath document root is the extension statement itself, such that the child nodes of the document root are represented by the data-def-stmt substatements within this extension. This conceptual document is the context for the following YANG statements: - must-stmt - when-stmt - path-stmt - min-elements-stmt - max-elements-stmt - mandatory-stmt - unique-stmt - ordered-by - instance-identifier data type The following data-def-stmt substatements are constrained when used within a 'yang-data' extension statement. - The list-stmt is not required to have a key-stmt defined. - The if-feature-stmt is ignored if present. - The config-stmt is ignored if present. - The available identity values for any 'identityref' leaf or leaf-list nodes are limited to the module containing this extension statement and the modules imported into that module. "; } rc:yang-data yang-errors { uses errors; } rc:yang-data yang-api { uses restconf; } grouping errors { description "A grouping that contains a YANG container representing the syntax and semantics of a YANG Patch error report within a response message."; container errors { description "Represents an error report returned by the server if a request results in an error."; list error { description "An entry containing information about one specific error that occurred while processing a RESTCONF request."; reference "RFC 6241, Section 4.3."; leaf error-type { type enumeration { enum transport { description "The transport layer."; } enum rpc { description "The rpc or notification layer."; } enum protocol { description "The protocol operation layer."; } enum application { description "The server application layer."; } } mandatory true; description "The protocol layer where the error occurred."; } leaf error-tag { type string; mandatory true; description "The enumerated error-tag."; } leaf error-app-tag { type string; description "The application-specific error-tag."; } leaf error-path { type instance-identifier; description "The YANG instance identifier associated with the error node."; } leaf error-message { type string; description "A message describing the error."; } anydata error-info { description "This anydata value MUST represent a container with zero or more data nodes representing additional error information."; } } } } grouping restconf { description "Conceptual grouping representing the RESTCONF root resource."; container restconf { description "Conceptual container representing the RESTCONF root resource."; container data { description "Container representing the datastore resource. Represents the conceptual root of all state data and configuration data supported by the server. The child nodes of this container can be any data resources that are defined as top-level data nodes from the YANG modules advertised by the server in the 'ietf-yang-library' module."; } container operations { description "Container for all operation resources. Each resource is represented as an empty leaf with the name of the RPC operation from the YANG 'rpc' statement. For example, the 'system-restart' RPC operation defined in the 'ietf-system' module would be represented as an empty leaf in the 'ietf-system' namespace. This is a conceptual leaf and will not actually be found in the module: module ietf-system { leaf system-restart { type empty; } }
EID 5756 (Verified) is as follows:

Section: 8

Original Text:

  module ietf-system {
    leaf system-reset {
      type empty;
    }
  }

Corrected Text:

  module ietf-system {
    leaf system-restart {
      type empty;
    }
  }
Notes:
The section on page 84 discusses the "system-restart" RPC from RFC 7317, but the conceptual example has "system-reset". Fix: s/system-reset/system-restart/.
To invoke the 'system-restart' RPC operation: POST /restconf/operations/ietf-system:system-restart To discover the RPC operations supported by the server: GET /restconf/operations In XML, the YANG module namespace identifies the module: <system-restart xmlns='urn:ietf:params:xml:ns:yang:ietf-system'/> In JSON, the YANG module name identifies the module: { 'ietf-system:system-restart' : [null] } "; } leaf yang-library-version { type string { pattern '\d{4}-\d{2}-\d{2}'; } config false; mandatory true; description "Identifies the revision date of the 'ietf-yang-library' module that is implemented by this RESTCONF server. Indicates the year, month, and day in YYYY-MM-DD numeric format."; } } } } <CODE ENDS> 9. RESTCONF Monitoring The "ietf-restconf-monitoring" module provides information about the RESTCONF protocol capabilities and event streams available from the server. A RESTCONF server MUST implement the "ietf-restconf-monitoring" module. YANG tree diagram for the "ietf-restconf-monitoring" module: +--ro restconf-state +--ro capabilities | +--ro capability* inet:uri +--ro streams +--ro stream* [name] +--ro name string +--ro description? string +--ro replay-support? boolean +--ro replay-log-creation-time? yang:date-and-time +--ro access* [encoding] +--ro encoding string +--ro location inet:uri 9.1. restconf-state/capabilities This mandatory container holds the RESTCONF protocol capability URIs supported by the server. The server MAY maintain a last-modified timestamp for this container and return the "Last-Modified" header field when this data node is retrieved with the GET or HEAD methods. Note that the last-modified timestamp for the datastore resource is not affected by changes to this subtree. The server SHOULD maintain an entity-tag for this container and return the "ETag" header field when this data node is retrieved with the GET or HEAD methods. Note that the entity-tag for the datastore resource is not affected by changes to this subtree. The server MUST include a "capability" URI leaf-list entry for the "defaults" mode used by the server, defined in Section 9.1.2. The server MUST include a "capability" URI leaf-list entry identifying each supported optional protocol feature. This includes optional query parameters and MAY include other capability URIs defined outside this document. 9.1.1. Query Parameter URIs A new set of RESTCONF Capability URIs are defined to identify the specific query parameters (defined in Section 4.8) supported by the server. The server MUST include a "capability" leaf-list entry for each optional query parameter that it supports. +----------------+---------+---------------------------------------+ | Name | Section | URI | | | | | +----------------+---------+---------------------------------------+ | depth | 4.8.2 | urn:ietf:params:restconf:capability: | | | | depth:1.0 | | | | | | fields | 4.8.3 | urn:ietf:params:restconf:capability: | | | | fields:1.0 | | | | | | filter | 4.8.4 | urn:ietf:params:restconf:capability: | | | | filter:1.0 | | | | | | replay | 4.8.7 | urn:ietf:params:restconf:capability: | | | 4.8.8 | replay:1.0 | | | | | | with-defaults | 4.8.9 | urn:ietf:params:restconf:capability: | | | | with-defaults:1.0 | +----------------+---------+---------------------------------------+ RESTCONF Query Parameter URIs 9.1.2. The "defaults" Protocol Capability URI This URI identifies the "basic-mode" default-handling mode that is used by the server for processing default leafs in requests for data resources. This protocol capability URI MUST be supported by the server and MUST be listed in the "capability" leaf-list defined in Section 9.3. +----------+--------------------------------------------------+ | Name | URI | +----------+--------------------------------------------------+ | defaults | urn:ietf:params:restconf:capability:defaults:1.0 | +----------+--------------------------------------------------+ RESTCONF "defaults" Capability URI The URI MUST contain a query parameter named "basic-mode" with one of the values listed below: +------------+------------------------------------------------------+ | Value | Description | +------------+------------------------------------------------------+ | report-all | No data nodes are considered default | | | | | trim | Values set to the YANG default-stmt value are | | | default | | | | | explicit | Values set by the client are never considered | | | default | +------------+------------------------------------------------------+ The "basic-mode" definitions are specified in "With-defaults Capability for NETCONF" [RFC6243]. If the "basic-mode" is set to "report-all", then the server MUST adhere to the default-handling behavior defined in Section 2.1 of [RFC6243]. If the "basic-mode" is set to "trim", then the server MUST adhere to the default-handling behavior defined in Section 2.2 of [RFC6243]. If the "basic-mode" is set to "explicit", then the server MUST adhere to the default-handling behavior defined in Section 2.3 of [RFC6243]. Example (split for display purposes only): urn:ietf:params:restconf:capability:defaults:1.0? basic-mode=explicit 9.2. restconf-state/streams This optional container provides access to the event streams supported by the server. The server MAY omit this container if no event streams are supported. The server will populate this container with a "stream" list entry for each stream type it supports. Each stream contains a leaf called "events", which contains a URI that represents an event stream resource. Stream resources are defined in Section 3.8. Notifications are defined in Section 6. 9.3. RESTCONF Monitoring Module The "ietf-restconf-monitoring" module defines monitoring information for the RESTCONF protocol. The "ietf-yang-types" and "ietf-inet-types" modules from [RFC6991] are used by this module for some type definitions. <CODE BEGINS> file "ietf-restconf-monitoring@2017-01-26.yang" module ietf-restconf-monitoring { namespace "urn:ietf:params:xml:ns:yang:ietf-restconf-monitoring"; prefix "rcmon"; import ietf-yang-types { prefix yang; } import ietf-inet-types { prefix inet; } organization "IETF NETCONF (Network Configuration) Working Group"; contact "WG Web: <https://datatracker.ietf.org/wg/netconf/> WG List: <mailto:netconf@ietf.org> Author: Andy Bierman <mailto:andy@yumaworks.com> Author: Martin Bjorklund <mailto:mbj@tail-f.com> Author: Kent Watsen <mailto:kwatsen@juniper.net>"; description "This module contains monitoring information for the RESTCONF protocol. Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of RFC 8040; see the RFC itself for full legal notices."; revision 2017-01-26 { description "Initial revision."; reference "RFC 8040: RESTCONF Protocol."; } container restconf-state { config false; description "Contains RESTCONF protocol monitoring information."; container capabilities { description "Contains a list of protocol capability URIs."; leaf-list capability { type inet:uri; description "A RESTCONF protocol capability URI."; } } container streams { description "Container representing the notification event streams supported by the server."; reference "RFC 5277, Section 3.4, <streams> element."; list stream { key name; description "Each entry describes an event stream supported by the server."; leaf name { type string; description "The stream name."; reference "RFC 5277, Section 3.4, <name> element."; } leaf description { type string; description "Description of stream content."; reference "RFC 5277, Section 3.4, <description> element."; } leaf replay-support { type boolean; default false; description "Indicates if replay buffer is supported for this stream. If 'true', then the server MUST support the 'start-time' and 'stop-time' query parameters for this stream."; reference "RFC 5277, Section 3.4, <replaySupport> element."; } leaf replay-log-creation-time { when "../replay-support" { description "Only present if notification replay is supported."; } type yang:date-and-time; description "Indicates the time the replay log for this stream was created."; reference "RFC 5277, Section 3.4, <replayLogCreationTime> element."; } list access { key encoding; min-elements 1; description "The server will create an entry in this list for each encoding format that is supported for this stream. The media type 'text/event-stream' is expected for all event streams. This list identifies the subtypes supported for this stream."; leaf encoding { type string; description "This is the secondary encoding format within the 'text/event-stream' encoding used by all streams. The type 'xml' is supported for XML encoding. The type 'json' is supported for JSON encoding."; } leaf location { type inet:uri; mandatory true; description "Contains a URL that represents the entry point for establishing notification delivery via server-sent events."; } } } } } } <CODE ENDS> 10. YANG Module Library The "ietf-yang-library" module defined in [RFC7895] provides information about the YANG modules and submodules used by the RESTCONF server. Implementation is mandatory for RESTCONF servers. All YANG modules and submodules used by the server MUST be identified in the YANG module library. 10.1. modules-state/module This mandatory list contains one entry for each YANG data model module supported by the server. There MUST be an instance of this list for every YANG module that is used by the server. The contents of this list are defined in the "module" YANG list statement in [RFC7895]. Note that there are no protocol-accessible objects in the "ietf-restconf" module to implement, but it is possible that a server will list the "ietf-restconf" module in the YANG library if it is imported (directly or indirectly) by an implemented module. 11. IANA Considerations 11.1. The "restconf" Relation Type This specification registers the "restconf" relation type in the "Link Relation Types" registry defined by [RFC5988]: Relation Name: restconf Description: Identifies the root of the RESTCONF API as configured on this HTTP server. The "restconf" relation defines the root of the API defined in RFC 8040. Subsequent revisions of RESTCONF will use alternate relation values to support protocol versioning. Reference: RFC 8040 11.2. Registrations for New URIs and YANG Modules This document registers two URIs as namespaces in the "IETF XML Registry" [RFC3688]: URI: urn:ietf:params:xml:ns:yang:ietf-restconf Registrant Contact: The IESG. XML: N/A; the requested URI is an XML namespace. URI: urn:ietf:params:xml:ns:yang:ietf-restconf-monitoring Registrant Contact: The IESG. XML: N/A; the requested URI is an XML namespace. This document registers two YANG modules in the "YANG Module Names" registry [RFC6020]: name: ietf-restconf namespace: urn:ietf:params:xml:ns:yang:ietf-restconf prefix: rc reference: RFC 8040 name: ietf-restconf-monitoring namespace: urn:ietf:params:xml:ns:yang:ietf-restconf-monitoring prefix: rcmon reference: RFC 8040 11.3. Media Types 11.3.1. Media Type "application/yang-data+xml" Type name: application Subtype name: yang-data+xml Required parameters: None Optional parameters: None Encoding considerations: 8-bit Each conceptual YANG data node is encoded according to the XML Encoding Rules and Canonical Format for the specific YANG data node type defined in [RFC7950]. Security considerations: Security considerations related to the generation and consumption of RESTCONF messages are discussed in Section 12 of RFC 8040. Additional security considerations are specific to the semantics of particular YANG data models. Each YANG module is expected to specify security considerations for the YANG data defined in that module. Interoperability considerations: RFC 8040 specifies the format of conforming messages and the interpretation thereof. Published specification: RFC 8040 Applications that use this media type: Instance document data parsers used within a protocol or automation tool that utilize YANG-defined data structures. Fragment identifier considerations: Fragment identifiers for this type are not defined. All YANG data nodes are accessible as resources using the path in the request URI. Additional information: Deprecated alias names for this type: N/A Magic number(s): N/A File extension(s): None Macintosh file type code(s): "TEXT" Person & email address to contact for further information: See the Authors' Addresses section of RFC 8040. Intended usage: COMMON Restrictions on usage: N/A Author: See the Authors' Addresses section of RFC 8040. Change controller: Internet Engineering Task Force (mailto:iesg@ietf.org). Provisional registration? (standards tree only): no 11.3.2. Media Type "application/yang-data+json" Type name: application Subtype name: yang-data+json Required parameters: None Optional parameters: None Encoding considerations: 8-bit Each conceptual YANG data node is encoded according to [RFC7951]. A metadata annotation is encoded according to [RFC7952]. Security considerations: Security considerations related to the generation and consumption of RESTCONF messages are discussed in Section 12 of RFC 8040. Additional security considerations are specific to the semantics of particular YANG data models. Each YANG module is expected to specify security considerations for the YANG data defined in that module. Interoperability considerations: RFC 8040 specifies the format of conforming messages and the interpretation thereof. Published specification: RFC 8040 Applications that use this media type: Instance document data parsers used within a protocol or automation tool that utilize YANG-defined data structures. Fragment identifier considerations: The syntax and semantics of fragment identifiers are the same as the syntax and semantics specified for the "application/json" media type. Additional information: Deprecated alias names for this type: N/A Magic number(s): N/A File extension(s): None Macintosh file type code(s): "TEXT" Person & email address to contact for further information: See the Authors' Addresses section of RFC 8040. Intended usage: COMMON Restrictions on usage: N/A Author: See the Authors' Addresses section of RFC 8040. Change controller: Internet Engineering Task Force (mailto:iesg@ietf.org). Provisional registration? (standards tree only): no 11.4. RESTCONF Capability URNs This document defines a registry for RESTCONF capability identifiers. The name of the registry is "RESTCONF Capability URNs". The review policy for this registry is "IETF Review" [RFC5226]. The registry shall record the following for each entry: o the name of the RESTCONF capability. By convention, this name begins with the colon (":") character. o the URN for the RESTCONF capability. o the reference for the document registering the value. This document registers several capability identifiers in the "RESTCONF Capability URNs" registry: Index Capability Identifier --------------------------------------------------------------------- :defaults urn:ietf:params:restconf:capability:defaults:1.0 :depth urn:ietf:params:restconf:capability:depth:1.0 :fields urn:ietf:params:restconf:capability:fields:1.0 :filter urn:ietf:params:restconf:capability:filter:1.0 :replay urn:ietf:params:restconf:capability:replay:1.0 :with-defaults urn:ietf:params:restconf:capability:with-defaults:1.0 11.5. Registration of "restconf" URN Sub-namespace IANA has registered a new URN sub-namespace within the "IETF URN Sub-namespace for Registered Protocol Parameter Identifiers" registry defined in [RFC3553]. Registry Name: restconf Specification: RFC 8040 Repository: "RESTCONF Capability URNs" registry (Section 11.4) Index value: Sub-parameters MUST be specified in UTF-8, using standard URI encoding where necessary. 12. Security Considerations Section 2.1 states that "a RESTCONF server MUST support the TLS protocol [RFC5246]." This language leaves open the possibility that a RESTCONF server might also support future versions of the TLS protocol. Of specific concern, TLS 1.3 [TLS1.3] introduces support for 0-RTT handshakes that can lead to security issues for RESTCONF APIs, as described in Appendix B.1 of the TLS 1.3 document. It is therefore RECOMMENDED that RESTCONF servers do not support 0-RTT at all (not even for idempotent requests) until an update to this RFC guides otherwise. Section 2.5 recommends authentication based on TLS client certificates but allows the use of any authentication scheme defined in the "Hypertext Transfer Protocol (HTTP) Authentication Scheme Registry". Implementations need to be aware that the strengths of these methods vary greatly and that some may be considered experimental. Selection of any of these schemes SHOULD be performed after reading the Security Considerations section of the RFC associated with the scheme's registry entry. The "ietf-restconf-monitoring" YANG module defined in this memo is designed to be accessed via the NETCONF protocol [RFC6241]. The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) [RFC6242]. The NETCONF access control model [RFC6536] provides the means to restrict access for particular NETCONF users to a preconfigured subset of all available NETCONF protocol operations and content. The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is TLS [RFC5246]. The RESTCONF protocol uses the NETCONF access control model [RFC6536], which provides the means to restrict access for particular RESTCONF users to a preconfigured subset of all available RESTCONF protocol operations and content. This section provides security considerations for the resources defined by the RESTCONF protocol. Security considerations for HTTPS are defined in [RFC7230]. Aside from the "ietf-restconf-monitoring" module (Section 9) and the "ietf-yang-library" module (Section 10), RESTCONF does not specify which YANG modules a server needs to support. Security considerations for the other modules manipulated by RESTCONF can be found in the documents defining those YANG modules. Configuration information is by its very nature sensitive. Its transmission in the clear and without integrity checking leaves devices open to classic eavesdropping and false data injection attacks. Configuration information often contains passwords, user names, service descriptions, and topological information, all of which are sensitive. There are many patterns of attack that have been observed through operational practice with existing management interfaces. It would be wise for implementers to research them and take them into account when implementing this protocol. Different environments may well allow different rights prior to, and then after, authentication. When a RESTCONF operation is not properly authorized, the RESTCONF server MUST return a "401 Unauthorized" status-line. Note that authorization information can be exchanged in the form of configuration information, which is all the more reason to ensure the security of the connection. Note that it is possible for a client to detect configuration changes in data resources it is not authorized to access by monitoring changes in the "ETag" and "Last-Modified" header fields returned by the server for the datastore resource. A RESTCONF server implementation SHOULD attempt to prevent system disruption due to excessive resource consumption required to fulfill edit requests via the POST, PUT, and PATCH methods. On such an implementation, it may be possible to construct an attack that attempts to consume all available memory or other resource types. 13. References 13.1. Normative References [RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, DOI 10.17487/RFC2046, November 1996, <http://www.rfc-editor.org/info/rfc2046>. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <http://www.rfc-editor.org/info/rfc2119>. [RFC3553] Mealling, M., Masinter, L., Hardie, T., and G. Klyne, "An IETF URN Sub-namespace for Registered Protocol Parameters", BCP 73, RFC 3553, DOI 10.17487/RFC3553, June 2003, <http://www.rfc-editor.org/info/rfc3553>. [RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, January 2004, <http://www.rfc-editor.org/info/rfc3688>. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, <http://www.rfc-editor.org/info/rfc3986>. [RFC5234] Crocker, D., Ed., and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, DOI 10.17487/RFC5234, January 2008, <http://www.rfc-editor.org/info/rfc5234>. [RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/RFC5246, August 2008, <http://www.rfc-editor.org/info/rfc5246>. [RFC5277] Chisholm, S. and H. Trevino, "NETCONF Event Notifications", RFC 5277, DOI 10.17487/RFC5277, July 2008, <http://www.rfc-editor.org/info/rfc5277>. [RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008, <http://www.rfc-editor.org/info/rfc5280>. [RFC5789] Dusseault, L. and J. Snell, "PATCH Method for HTTP", RFC 5789, DOI 10.17487/RFC5789, March 2010, <http://www.rfc-editor.org/info/rfc5789>. [RFC5988] Nottingham, M., "Web Linking", RFC 5988, DOI 10.17487/RFC5988, October 2010, <http://www.rfc-editor.org/info/rfc5988>. [RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, DOI 10.17487/RFC6020, October 2010, <http://www.rfc-editor.org/info/rfc6020>. [RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed., and A. Bierman, Ed., "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011, <http://www.rfc-editor.org/info/rfc6241>. [RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011, <http://www.rfc-editor.org/info/rfc6242>. [RFC6243] Bierman, A. and B. Lengyel, "With-defaults Capability for NETCONF", RFC 6243, DOI 10.17487/RFC6243, June 2011, <http://www.rfc-editor.org/info/rfc6243>. [RFC6415] Hammer-Lahav, E., Ed., and B. Cook, "Web Host Metadata", RFC 6415, DOI 10.17487/RFC6415, October 2011, <http://www.rfc-editor.org/info/rfc6415>. [RFC6536] Bierman, A. and M. Bjorklund, "Network Configuration Protocol (NETCONF) Access Control Model", RFC 6536, DOI 10.17487/RFC6536, March 2012, <http://www.rfc-editor.org/info/rfc6536>. [RFC6570] Gregorio, J., Fielding, R., Hadley, M., Nottingham, M., and D. Orchard, "URI Template", RFC 6570, DOI 10.17487/RFC6570, March 2012, <http://www.rfc-editor.org/info/rfc6570>. [RFC6991] Schoenwaelder, J., Ed., "Common YANG Data Types", RFC 6991, DOI 10.17487/RFC6991, July 2013, <http://www.rfc-editor.org/info/rfc6991>. [RFC7159] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", RFC 7159, DOI 10.17487/RFC7159, March 2014, <http://www.rfc-editor.org/info/rfc7159>. [RFC7230] Fielding, R., Ed., and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing", RFC 7230, DOI 10.17487/RFC7230, June 2014, <http://www.rfc-editor.org/info/rfc7230>. [RFC7231] Fielding, R., Ed., and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Semantics and Content", RFC 7231, DOI 10.17487/RFC7231, June 2014, <http://www.rfc-editor.org/info/rfc7231>. [RFC7232] Fielding, R., Ed., and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Conditional Requests", RFC 7232, DOI 10.17487/RFC7232, June 2014, <http://www.rfc-editor.org/info/rfc7232>. [RFC7235] Fielding, R., Ed., and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Authentication", RFC 7235, DOI 10.17487/RFC7235, June 2014, <http://www.rfc-editor.org/info/rfc7235>. [RFC7320] Nottingham, M., "URI Design and Ownership", BCP 190, RFC 7320, DOI 10.17487/RFC7320, July 2014, <http://www.rfc-editor.org/info/rfc7320>. [RFC7525] Sheffer, Y., Holz, R., and P. Saint-Andre, "Recommendations for Secure Use of Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)", BCP 195, RFC 7525, DOI 10.17487/RFC7525, May 2015, <http://www.rfc-editor.org/info/rfc7525>. [RFC7589] Badra, M., Luchuk, A., and J. Schoenwaelder, "Using the NETCONF Protocol over Transport Layer Security (TLS) with Mutual X.509 Authentication", RFC 7589, DOI 10.17487/RFC7589, June 2015, <http://www.rfc-editor.org/info/rfc7589>. [RFC7895] Bierman, A., Bjorklund, M., and K. Watsen, "YANG Module Library", RFC 7895, DOI 10.17487/RFC7895, June 2016, <http://www.rfc-editor.org/info/rfc7895>. [RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language", RFC 7950, DOI 10.17487/RFC7950, August 2016, <http://www.rfc-editor.org/info/rfc7950>. [RFC7951] Lhotka, L., "JSON Encoding of Data Modeled with YANG", RFC 7951, DOI 10.17487/RFC7951, August 2016, <http://www.rfc-editor.org/info/rfc7951>. [RFC7952] Lhotka, L., "Defining and Using Metadata with YANG", RFC 7952, DOI 10.17487/RFC7952, August 2016, <http://www.rfc-editor.org/info/rfc7952>. [W3C.REC-eventsource-20150203] Hickson, I., "Server-Sent Events", World Wide Web Consortium Recommendation REC-eventsource-20150203, February 2015, <http://www.w3.org/TR/2015/REC-eventsource-20150203>. [W3C.REC-xml-20081126] Bray, T., Paoli, J., Sperberg-McQueen, M., Maler, E., and F. Yergeau, "Extensible Markup Language (XML) 1.0 (Fifth Edition)", World Wide Web Consortium Recommendation REC-xml-20081126, November 2008, <http://www.w3.org/TR/2008/REC-xml-20081126>. [XPath] Clark, J. and S. DeRose, "XML Path Language (XPath) Version 1.0", World Wide Web Consortium Recommendation REC-xpath-19991116, November 1999, <http://www.w3.org/TR/1999/REC-xpath-19991116>. 13.2. Informative References [REST-Dissertation] Fielding, R., "Architectural Styles and the Design of Network-based Software Architectures", 2000. [RFC2818] Rescorla, E., "HTTP Over TLS", RFC 2818, DOI 10.17487/RFC2818, May 2000, <http://www.rfc-editor.org/info/rfc2818>. [RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 5226, DOI 10.17487/RFC5226, May 2008, <http://www.rfc-editor.org/info/rfc5226>. [TLS1.3] Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", Work in Progress, draft-ietf-tls-tls13-18, October 2016. [YANG-Patch] Bierman, A., Bjorklund, M., and K. Watsen, "YANG Patch Media Type", Work in Progress, draft-ietf-netconf-yang-patch-14, November 2016. Appendix A. Example YANG Module The example YANG module used in this document represents a simple media jukebox interface. YANG tree diagram for the "example-jukebox" module: +--rw jukebox! +--rw library | +--rw artist* [name] | | +--rw name string | | +--rw album* [name] | | +--rw name string | | +--rw genre? identityref | | +--rw year? uint16 | | +--rw admin | | | +--rw label? string | | | +--rw catalogue-number? string | | +--rw song* [name] | | +--rw name string | | +--rw location string | | +--rw format? string | | +--rw length? uint32 | +--ro artist-count? uint32 | +--ro album-count? uint32 | +--ro song-count? uint32 +--rw playlist* [name] | +--rw name string | +--rw description? string | +--rw song* [index] | +--rw index uint32 | +--rw id instance-identifier +--rw player +--rw gap? decimal64 rpcs: +---x play +--ro input +--ro playlist string +--ro song-number uint32 A.1. "example-jukebox" YANG Module module example-jukebox { namespace "http://example.com/ns/example-jukebox"; prefix "jbox"; organization "Example, Inc."; contact "support at example.com"; description "Example Jukebox Data Model Module."; revision "2016-08-15" { description "Initial version."; reference "example.com document 1-4673."; } identity genre { description "Base for all genre types."; } // abbreviated list of genre classifications identity alternative { base genre; description "Alternative music."; } identity blues { base genre; description "Blues music."; } identity country { base genre; description "Country music."; } identity jazz { base genre; description "Jazz music."; } identity pop { base genre; description "Pop music."; } identity rock { base genre; description "Rock music."; } container jukebox { presence "An empty container indicates that the jukebox service is available."; description "Represents a 'jukebox' resource, with a library, playlists, and a 'play' operation."; container library { description "Represents the 'jukebox' library resource."; list artist { key name; description "Represents one 'artist' resource within the 'jukebox' library resource."; leaf name { type string { length "1 .. max"; } description "The name of the artist."; } list album { key name; description "Represents one 'album' resource within one 'artist' resource, within the jukebox library."; leaf name { type string { length "1 .. max"; } description "The name of the album."; } leaf genre { type identityref { base genre; } description "The genre identifying the type of music on the album."; } leaf year { type uint16 { range "1900 .. max"; } description "The year the album was released."; } container admin { description "Administrative information for the album."; leaf label { type string; description "The label that released the album."; } leaf catalogue-number { type string; description "The album's catalogue number."; } } list song { key name; description "Represents one 'song' resource within one 'album' resource, within the jukebox library."; leaf name { type string { length "1 .. max"; } description "The name of the song."; } leaf location { type string; mandatory true; description "The file location string of the media file for the song."; } leaf format { type string; description "An identifier string for the media type for the file associated with the 'location' leaf for this entry."; } leaf length { type uint32; units "seconds"; description "The duration of this song in seconds."; } } // end list 'song' } // end list 'album' } // end list 'artist' leaf artist-count { type uint32; units "artists"; config false; description "Number of artists in the library."; } leaf album-count { type uint32; units "albums"; config false; description "Number of albums in the library."; } leaf song-count { type uint32; units "songs"; config false; description "Number of songs in the library."; } } // end library list playlist { key name; description "Example configuration data resource."; leaf name { type string; description "The name of the playlist."; } leaf description { type string; description "A comment describing the playlist."; } list song { key index; ordered-by user; description "Example nested configuration data resource."; leaf index { // not really needed type uint32; description "An arbitrary integer index for this playlist song."; } leaf id { type instance-identifier; mandatory true; description "Song identifier. Must identify an instance of /jukebox/library/artist/album/song/name."; } } } container player { description "Represents the jukebox player resource."; leaf gap { type decimal64 { fraction-digits 1; range "0.0 .. 2.0"; } units "tenths of seconds"; description "Time gap between each song."; } } } rpc play { description "Control function for the jukebox player."; input { leaf playlist { type string; mandatory true; description "The playlist name."; } leaf song-number { type uint32; mandatory true; description "Song number in playlist to play."; } } } } Appendix B. RESTCONF Message Examples The examples within this document use the normative YANG module "ietf-restconf" as defined in Section 8 and the non-normative example YANG module "example-jukebox" as defined in Appendix A.1. This section shows some typical RESTCONF message exchanges. B.1. Resource Retrieval Examples B.1.1. Retrieve the Top-Level API Resource The client starts by retrieving the RESTCONF root resource: GET /.well-known/host-meta HTTP/1.1 Host: example.com Accept: application/xrd+xml The server might respond as follows: HTTP/1.1 200 OK Content-Type: application/xrd+xml Content-Length: nnn <XRD xmlns='http://docs.oasis-open.org/ns/xri/xrd-1.0'> <Link rel='restconf' href='/restconf'/> </XRD> The client may then retrieve the top-level API resource, using the root resource "/restconf". GET /restconf HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+json { "ietf-restconf:restconf" : { "data" : {}, "operations" : {}, "yang-library-version" : "2016-06-21" } } To request that the response content be encoded in XML, the "Accept" header can be used, as in this example request: GET /restconf HTTP/1.1 Host: example.com Accept: application/yang-data+xml The server will return the same conceptual data either way, which might be as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Cache-Control: no-cache Content-Type: application/yang-data+xml <restconf xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf"> <data/> <operations/> <yang-library-version>2016-06-21</yang-library-version> </restconf> B.1.2. Retrieve the Server Module Information It is possible that the YANG library module will change over time. The client can retrieve the revision date of the "ietf-yang-library" module supported by the server from the API resource, as described in the previous section. In this example, the client is retrieving the module information from the server in JSON format: GET /restconf/data/ietf-yang-library:modules-state HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Cache-Control: no-cache Last-Modified: Thu, 26 Jan 2017 14:00:14 GMT Content-Type: application/yang-data+json { "ietf-yang-library:modules-state" : { "module-set-id" : "5479120c17a619545ea6aff7aa19838b036ebbd7", "module" : [ { "name" : "foo", "revision" : "2012-01-02", "schema" : "https://example.com/modules/foo/2012-01-02", "namespace" : "http://example.com/ns/foo", "feature" : [ "feature1", "feature2" ], "deviation" : [ { "name" : "foo-dev", "revision" : "2012-02-16" } ], "conformance-type" : "implement" }, { "name" : "ietf-yang-library", "revision" : "2016-06-21", "schema" : "https://example.com/modules/\ ietf-yang-library/2016-06-21", "namespace" : "urn:ietf:params:xml:ns:yang:ietf-yang-library", "conformance-type" : "implement" }, { "name" : "foo-types", "revision" : "2012-01-05", "schema" : "https://example.com/modules/foo-types/2012-01-05", "namespace" : "http://example.com/ns/foo-types", "conformance-type" : "import" }, { "name" : "bar", "revision" : "2012-11-05", "schema" : "https://example.com/modules/bar/2012-11-05", "namespace" : "http://example.com/ns/bar", "feature" : [ "bar-ext" ], "conformance-type" : "implement", "submodule" : [ { "name" : "bar-submod1", "revision" : "2012-11-05", "schema" : "https://example.com/modules/bar-submod1/2012-11-05" }, { "name" : "bar-submod2", "revision" : "2012-11-05", "schema" : "https://example.com/modules/bar-submod2/2012-11-05" } ] } ] } } B.1.3. Retrieve the Server Capability Information In this example, the client is retrieving the capability information from the server in XML format, and the server supports all of the RESTCONF query parameters, plus one vendor parameter: GET /restconf/data/ietf-restconf-monitoring:restconf-state/\ capabilities HTTP/1.1 Host: example.com Accept: application/yang-data+xml The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Cache-Control: no-cache Last-Modified: Thu, 26 Jan 2017 16:00:14 GMT Content-Type: application/yang-data+xml <capabilities xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf-monitoring"> <capability>\ urn:ietf:params:restconf:capability:defaults:1.0?\ basic-mode=explicit\ </capability> <capability>\ urn:ietf:params:restconf:capability:with-defaults:1.0\ </capability> <capability>\ urn:ietf:params:restconf:capability:depth:1.0\ </capability> <capability>\ urn:ietf:params:restconf:capability:fields:1.0\ </capability> <capability>\ urn:ietf:params:restconf:capability:filter:1.0\ </capability> <capability>\ urn:ietf:params:restconf:capability:start-time:1.0\ </capability> <capability>\ urn:ietf:params:restconf:capability:stop-time:1.0\ </capability> <capability>\ http://example.com/capabilities/myparam\ </capability> </capabilities> B.2. Data Resource and Datastore Resource Examples B.2.1. Create New Data Resources To create a new "artist" resource within the "library" resource, the client might send the following request: POST /restconf/data/example-jukebox:jukebox/library HTTP/1.1 Host: example.com Content-Type: application/yang-data+json { "example-jukebox:artist" : [ { "name" : "Foo Fighters" } ] } If the resource is created, the server might respond as follows: HTTP/1.1 201 Created Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Location: https://example.com/restconf/data/\ example-jukebox:jukebox/library/artist=Foo%20Fighters Last-Modified: Thu, 26 Jan 2017 20:56:30 GMT ETag: "b3830f23a4c" To create a new "album" resource for this artist within the "jukebox" resource, the client might send the following request: POST /restconf/data/example-jukebox:jukebox/\ library/artist=Foo%20Fighters HTTP/1.1 Host: example.com Content-Type: application/yang-data+xml <album xmlns="http://example.com/ns/example-jukebox"> <name>Wasting Light</name> <year>2011</year> </album> If the resource is created, the server might respond as follows: HTTP/1.1 201 Created Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Location: https://example.com/restconf/data/\ example-jukebox:jukebox/library/artist=Foo%20Fighters/\ album=Wasting%20Light Last-Modified: Thu, 26 Jan 2017 20:56:30 GMT ETag: "b8389233a4c" B.2.2. Detect Datastore Resource Entity-Tag Change In this example, the server just supports the datastore last-changed timestamp. Assume that the client has cached the "Last-Modified" header from the response to the previous request. This value is used as in the "If-Unmodified-Since" header in the following request to patch an "album" list entry with a key value of "Wasting Light". Only the "genre" field is being updated. PATCH /restconf/data/example-jukebox:jukebox/\ library/artist=Foo%20Fighters/album=Wasting%20Light/\ genre HTTP/1.1 Host: example.com If-Unmodified-Since: Thu, 26 Jan 2017 20:56:30 GMT Content-Type: application/yang-data+json { "example-jukebox:genre" : "example-jukebox:alternative" } In this example, the datastore resource has changed since the time specified in the "If-Unmodified-Since" header. The server might respond as follows: HTTP/1.1 412 Precondition Failed Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Last-Modified: Thu, 26 Jan 2017 19:41:00 GMT ETag: "b34aed893a4c" B.2.3. Edit a Datastore Resource In this example, assume that there is a top-level data resource named "system" from the example-system module, and this container has a child leaf called "enable-jukebox-streaming": container system { leaf enable-jukebox-streaming { type boolean; } } In this example, PATCH is used by the client to modify two top-level resources at once, in order to enable jukebox streaming and add an "album" sub-resource to each of two "artist" resources: PATCH /restconf/data HTTP/1.1 Host: example.com Content-Type: application/yang-data+xml <data xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf"> <system xmlns="http://example.com/ns/example-system"> <enable-jukebox-streaming>true</enable-jukebox-streaming> </system> <jukebox xmlns="http://example.com/ns/example-jukebox"> <library> <artist> <name>Foo Fighters</name> <album> <name>One by One</name> <year>2012</year> </album> </artist> <artist> <name>Nick Cave and the Bad Seeds</name> <album> <name>Tender Prey</name> <year>1988</year> </album> </artist> </library> </jukebox> </data> B.2.4. Replace a Datastore Resource In this example, the entire configuration datastore contents are being replaced. Any child nodes not present in the <data> element but present in the server will be deleted. PUT /restconf/data HTTP/1.1 Host: example.com Content-Type: application/yang-data+xml <data xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf"> <jukebox xmlns="http://example.com/ns/example-jukebox"> <library> <artist> <name>Foo Fighters</name> <album> <name>One by One</name> <year>2012</year> </album> </artist> <artist> <name>Nick Cave and the Bad Seeds</name> <album> <name>Tender Prey</name> <year>1988</year> </album> </artist> </library> </jukebox> </data> B.2.5. Edit a Data Resource In this example, the client modifies one data node by adding an "album" sub-resource by sending a PATCH for the data resource: PATCH /restconf/data/example-jukebox:jukebox/library/\ artist=Nick%20Cave%20and%20the%20Bad%20Seeds HTTP/1.1 Host: example.com Content-Type: application/yang-data+xml <artist xmlns="http://example.com/ns/example-jukebox"> <name>Nick Cave and the Bad Seeds</name> <album> <name>The Good Son</name> <year>1990</year> </album> </artist> B.3. Query Parameter Examples B.3.1. "content" Parameter The "content" parameter is used to select the types of data child resources (configuration and/or non-configuration) that are returned by the server for a GET method request. In this example, a simple YANG list is used that has configuration and non-configuration child resources. container events { list event { key name; leaf name { type string; } leaf description { type string; } leaf event-count { type uint32; config false; } } } Example 1: content=all To retrieve all of the child resources, the "content" parameter is set to "all", or omitted, since this is the default value. The client might send the following: GET /restconf/data/example-events:events?\ content=all HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Cache-Control: no-cache Content-Type: application/yang-data+json { "example-events:events" : { "event" : [ { "name" : "interface-up", "description" : "Interface up notification count", "event-count" : 42 }, { "name" : "interface-down", "description" : "Interface down notification count", "event-count" : 4 } ] } } Example 2: content=config To retrieve only the configuration child resources, the "content" parameter is set to "config". Note that the "ETag" and "Last-Modified" headers are only returned if the "content" parameter value is "config". GET /restconf/data/example-events:events?\ content=config HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Last-Modified: Thu, 26 Jan 2017 16:45:20 GMT ETag: "eeeada438af" Cache-Control: no-cache Content-Type: application/yang-data+json { "example-events:events" : { "event" : [ { "name" : "interface-up", "description" : "Interface up notification count" }, { "name" : "interface-down", "description" : "Interface down notification count" } ] } } Example 3: content=nonconfig To retrieve only the non-configuration child resources, the "content" parameter is set to "nonconfig". Note that configuration ancestors (if any) and list key leafs (if any) are also returned. The client might send the following: GET /restconf/data/example-events:events?\ content=nonconfig HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Cache-Control: no-cache Content-Type: application/yang-data+json { "example-events:events" : { "event" : [ { "name" : "interface-up", "event-count" : 42 }, { "name" : "interface-down", "event-count" : 4 } ] } } B.3.2. "depth" Parameter The "depth" parameter is used to limit the number of levels of child resources that are returned by the server for a GET method request. The "depth" parameter starts counting levels at the level of the target resource that is specified, so that a depth level of "1" includes just the target resource level itself. A depth level of "2" includes the target resource level and its child nodes. This example shows how different values of the "depth" parameter would affect the reply content for the retrieval of the top-level "jukebox" data resource. Example 1: depth=unbounded To retrieve all of the child resources, the "depth" parameter is not present or is set to the default value "unbounded". GET /restconf/data/example-jukebox:jukebox?\ depth=unbounded HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Cache-Control: no-cache Content-Type: application/yang-data+json { "example-jukebox:jukebox" : { "library" : { "artist" : [ { "name" : "Foo Fighters", "album" : [ { "name" : "Wasting Light", "genre" : "example-jukebox:alternative", "year" : 2011, "song" : [ { "name" : "Wasting Light", "location" : "/media/foo/a7/wasting-light.mp3", "format" : "MP3", "length" : 286 }, { "name" : "Rope", "location" : "/media/foo/a7/rope.mp3", "format" : "MP3", "length" : 259 } ] } ] } ] }, "playlist" : [ { "name" : "Foo-One", "description" : "example playlist 1", "song" : [ { "index" : 1, "id" : "/example-jukebox:jukebox/library\ /artist[name='Foo Fighters']\ /album[name='Wasting Light']\ /song[name='Rope']" }, { "index" : 2, "id" : "/example-jukebox:jukebox/library\ /artist[name='Foo Fighters']\ /album[name='Wasting Light']\ /song[name='Bridge Burning']" } ] } ], "player" : { "gap" : "0.5" }
EID 5566 (Verified) is as follows:

Section: B.3.2

Original Text:

          "player" : {
            "gap" : 0.5
          }

Corrected Text:

          "player" : {
            "gap" : "0.5"
          }
Notes:
The quoted text occurs twice; p 128 and p 130.

The leaf "gap" is defined as type decimal64 in A.1. According to RFC 7951, section 6.1, a decimal64 type is represented as a string in JSON.
} } Example 2: depth=1 To determine if one or more resource instances exist for a given target resource, the value "1" is used. GET /restconf/data/example-jukebox:jukebox?depth=1 HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Cache-Control: no-cache Content-Type: application/yang-data+json { "example-jukebox:jukebox" : {} } Example 3: depth=3 To limit the depth level to the target resource plus two child resource layers, the value "3" is used. GET /restconf/data/example-jukebox:jukebox?depth=3 HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Cache-Control: no-cache Content-Type: application/yang-data+json { "example-jukebox:jukebox" : { "library" : { "artist" : [] }, "playlist" : [ { "name" : "Foo-One", "description" : "example playlist 1", "song" : [] } ], "player" : { "gap" : 0.5 } } }
EID 6473 (Verified) is as follows:

Section: B.3.2

Original Text:

   Example 3: depth=3

   To limit the depth level to the target resource plus two child
   resource layers, the value "3" is used.

      GET /restconf/data/example-jukebox:jukebox?depth=3 HTTP/1.1
      Host: example.com
      Accept: application/yang-data+json

   The server might respond as follows:

      HTTP/1.1 200 OK
      Date: Thu, 26 Jan 2017 20:56:30 GMT
      Server: example-server
      Cache-Control: no-cache
      Content-Type: application/yang-data+json

      {
        "example-jukebox:jukebox" : {
          "library" : {
            "artist" : {}
          },
          "playlist" : [
            {
              "name" : "Foo-One",
              "description" : "example playlist 1",
              "song" : {}
            }
          ],
          "player" : {
            "gap" : 0.5
          }
        }
      }

Corrected Text:

   Example 3: depth=3

   To limit the depth level to the target resource plus two child
   resource layers, the value "3" is used.

      GET /restconf/data/example-jukebox:jukebox?depth=3 HTTP/1.1
      Host: example.com
      Accept: application/yang-data+json

   The server might respond as follows:

      HTTP/1.1 200 OK
      Date: Thu, 26 Jan 2017 20:56:30 GMT
      Server: example-server
      Cache-Control: no-cache
      Content-Type: application/yang-data+json

      {
        "example-jukebox:jukebox" : {
          "library" : {
            "artist" : []
          },
          "playlist" : [
            {
              "name" : "Foo-One",
              "description" : "example playlist 1",
              "song" : []
            }
          ],
          "player" : {
            "gap" : 0.5
          }
        }
      }
Notes:
"artist" and "song" are defined as list. Therefore, according to RFC 7951, they should be encoded as array instead of object.
B.3.3. "fields" Parameter In this example, the client is retrieving the datastore resource in JSON format, but retrieving only the "modules-state/module" list, and only the "name" and "revision" nodes from each list entry. Note that the top node returned by the server matches the target resource node (which is "data" in this example). The "module-set-id" leaf is not returned because it is not selected in the fields expression. GET /restconf/data?fields=ietf-yang-library:modules-state/\ module(name;revision) HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+json { "ietf-restconf:data" : { "ietf-yang-library:modules-state" : { "module" : [ { "name" : "example-jukebox", "revision" : "2016-08-15" }, { "name" : "ietf-inet-types", "revision" : "2013-07-15" }, { "name" : "ietf-restconf-monitoring", "revision" : "2017-01-26" }, { "name" : "ietf-yang-library", "revision" : "2016-06-21" }, { "name" : "ietf-yang-types", "revision" : "2013-07-15" } ] } } } B.3.4. "insert" Parameter In this example, a new first song entry in the "Foo-One" playlist is being created. Request from client: POST /restconf/data/example-jukebox:jukebox/\ playlist=Foo-One?insert=first HTTP/1.1 Host: example.com Content-Type: application/yang-data+json { "example-jukebox:song" : [ { "index" : 1, "id" : "/example-jukebox:jukebox/library\ /artist[name='Foo Fighters']\ /album[name='Wasting Light']\ /song[name='Rope']" } ] } Response from server: HTTP/1.1 201 Created Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Last-Modified: Thu, 26 Jan 2017 20:56:30 GMT Location: https://example.com/restconf/data/\ example-jukebox:jukebox/playlist=Foo-One/song=1 ETag: "eeeada438af" B.3.5. "point" Parameter In this example, the client is inserting a new song entry in the "Foo-One" playlist after the first song. Request from client: POST /restconf/data/example-jukebox:jukebox/\ playlist=Foo-One?insert=after&point=\ %2Fexample-jukebox%3Ajukebox\ %2Fplaylist%3DFoo-One%2Fsong%3D1 HTTP/1.1 Host: example.com Content-Type: application/yang-data+json { "example-jukebox:song" : [ { "index" : 2, "id" : "/example-jukebox:jukebox/library\ /artist[name='Foo Fighters']\ /album[name='Wasting Light']\ /song[name='Bridge Burning']" } ] } Response from server: HTTP/1.1 201 Created Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Last-Modified: Thu, 26 Jan 2017 20:56:30 GMT Location: https://example.com/restconf/data/\ example-jukebox:jukebox/playlist=Foo-One/song=2 ETag: "abcada438af" B.3.6. "filter" Parameter The following URIs show some examples of notification filter specifications: // filter = /event/event-class='fault' GET /streams/NETCONF?filter=%2Fevent%2Fevent-class%3D'fault' // filter = /event/severity<=4 GET /streams/NETCONF?filter=%2Fevent%2Fseverity%3C%3D4 // filter = /linkUp|/linkDown GET /streams/SNMP?filter=%2FlinkUp%7C%2FlinkDown // filter = /*/reporting-entity/card!='Ethernet0' GET /streams/NETCONF?\ filter=%2F*%2Freporting-entity%2Fcard%21%3D'Ethernet0' // filter = /*/email-addr[contains(.,'company.com')] GET /streams/critical-syslog?\ filter=%2F*%2Femail-addr[contains(.%2C'company.com')] // Note: The module name is used as the prefix. // filter = (/example-mod:event1/name='joe' and // /example-mod:event1/status='online') GET /streams/NETCONF?\ filter=(%2Fexample-mod%3Aevent1%2Fname%3D'joe'%20and\ %20%2Fexample-mod%3Aevent1%2Fstatus%3D'online') // To get notifications from just two modules (e.g., m1 + m2) // filter=(/m1:* or /m2:*) GET /streams/NETCONF?filter=(%2Fm1%3A*%20or%20%2Fm2%3A*) B.3.7. "start-time" Parameter The following URI shows an example of the "start-time" query parameter: // start-time = 2014-10-25T10:02:00Z GET /streams/NETCONF?start-time=2014-10-25T10%3A02%3A00Z B.3.8. "stop-time" Parameter The following URI shows an example of the "stop-time" query parameter: // start-time = 2014-10-25T10:02:00Z // stop-time = 2014-10-25T12:31:00Z GET /streams/NETCONF?start-time=2014-10-25T10%3A02%3A00Z\ &stop-time=2014-10-25T12%3A31%3A00Z
EID 5504 (Verified) is as follows:

Section: B.3.8

Original Text:

      GET /mystreams/NETCONF?start-time=2014-10-25T10%3A02%3A00Z\
         &stop-time=2014-10-25T12%3A31%3A00Z

Corrected Text:

      GET /streams/NETCONF?start-time=2014-10-25T10%3A02%3A00Z\
         &stop-time=2014-10-25T12%3A31%3A00Z
Notes:
The node 'mystreams' is incorrect.
B.3.9. "with-defaults" Parameter Assume that the server implements the module "example" defined in Appendix A.1 of [RFC6243], and assume that the server's datastore is as defined in Appendix A.2 of [RFC6243]. If the server's "basic-mode" parameter in the "defaults" protocol capability URI (Section 9.1.2) is "trim", the following request for interface "eth1" might be as follows: Without query parameter: GET /restconf/data/example:interfaces/interface=eth1 HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+json { "example:interface" : [ { "name" : "eth1", "status" : "up" } ] } Note that the "mtu" leaf is missing because it is set to the default "1500", and the server's default-handling "basic-mode" parameter is "trim". With query parameter: GET /restconf/data/example:interfaces/interface=eth1\ ?with-defaults=report-all HTTP/1.1 Host: example.com Accept: application/yang-data+json The server might respond as follows: HTTP/1.1 200 OK Date: Thu, 26 Jan 2017 20:56:30 GMT Server: example-server Content-Type: application/yang-data+json { "example:interface" : [ { "name" : "eth1", "mtu" : 1500, "status" : "up" } ] } Note that the server returns the "mtu" leaf because the "report-all" mode was requested with the "with-defaults" query parameter. Acknowledgements The authors would like to thank the following people for their contributions to this document: Ladislav Lhotka, Juergen Schoenwaelder, Rex Fernando, Robert Wilton, and Jonathan Hansford. The authors would like to thank the following people for their excellent technical reviews of this document: Mehmet Ersue, Mahesh Jethanandani, Qin Wu, Joe Clarke, Bert Wijnen, Ladislav Lhotka, Rodney Cummings, Frank Xialiang, Tom Petch, Robert Sparks, Balint Uveges, Randy Presuhn, Sue Hares, Mark Nottingham, Benoit Claise, Dale Worley, and Lionel Morand. Contributions to this material by Andy Bierman are based upon work supported by the United States Army, Space & Terrestrial Communications Directorate (S&TCD) under Contract No. W15P7T-13-C-A616. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the S&TCD. Authors' Addresses Andy Bierman YumaWorks Email: andy@yumaworks.com Martin Bjorklund Tail-f Systems Email: mbj@tail-f.com Kent Watsen Juniper Networks Email: kwatsen@juniper.net